Skip to main content

Filter By:

Pedals

Crank Brothers Mallet DH
$0.99 - $169.00
Crank Brothers Mallet DH, the choice of DH world champions. - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float and release angle - Premium bearings and double seal system - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material cast: Stainless steel - Spring material 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type IGUS LL-glide bearing - Outer bearing type enduro cartridge bearing - Cleat premium brass cleats with shims included - Adjustable pins 8 per side for grip - Endcap hex alloy - Weight: 479 grams
No Image
$8.00
Replacement pins for Deity Black Kat pedals.
Odyssey Twisted PC Pedals
$13.99 - $16.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
Fyxation Gates Nylon Platform Pedals
$19.95
- Classic BMX-style platform pedal for all-around use across varied disciplines - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives - 22.5mm height/105mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 405g
DMR V6 Pedals
$24.95
A nylon evolution of DMR's V12 body design. Equipped with the same concave footprint and narrow profile DMR pedals are known for, while spinning on a Dual DU bushing system to provide the value of a plastic pedal with a thoughtful approach to increased durability. - Chromoly axle - Dual DU bushing system - Full-length 6mm off-road pins for added grip
Deity Components Compound Pedals
$48.99
The Compound pedals are fully serviceable with sealed bearings and chromoly pins and spindle. These pedals beg you to challenge them as they continue to perform hassle free for as long as you let them. Not only will they surprise you with durability, but the colored composite pedal body never fades or shows wear as the color runs throughout to deliver a fresh pedal day in and day out. - Lightweight injection-molded nylon fiber composite body - Replaceable chromoly pins - Super-thin profile - DU bushing and double-micro-sealed bearing system - Fully sealed, rebuildable, thin, and offer the same grip as a traditional aluminum pedal - Nylon fiber blend does not get hung up on rocks or ledges - Nylon fiber body does not shatter - 9/16"
Deity Components Compound V2
$48.99 - $54.99
These entry level nylon composite pedals are an amazing value with unbelievable performance! Built on the same internal system as our retired Decoy pedal and all new Black Kat pedal, the COMPOUND pedals are full serviceable with sealed bearings and cromo pins and spindle. These pedals peg you to challenge them as they continue to perform hassle free for as long as you let them. Not only will they surprise you with durability, but the colored composite pedal body never fades or shows wear as the color runs throughout to deliver a fresh pedal day in and day out. Give the value packed COMPOUND pedal a try and see why you’ll be back to try out our top tier acclaimed DEITY pedal designs, the BLACK KAT, BLADERUNNER, and TMAC!
Crank Brothers Stamp 1 Large
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Crank Brothers Stamp 1 Large LE
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction pins: 9 per side (mounted from back) - Inner Bearing type: Igus LL-glide bearing - Outer Bearing type: Enduro cartridge bearing - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Crank Brothers Stamp 1 Small
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Crank Brothers Stamp 1 Small LE
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 100mm x 100mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 299g per pair
Deity Components Deftrap
$54.99
With the addition of the DEFTRAP pedal, we sought to revolutionize the expectations for nylon composite pedals. Built around a true concave profile, the top-tier nylon and glass fiber composite material creates a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, and the ability to skim over rocks all offered in 10 colors, the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market. - All-new pedal design inspired by the world-renowned TMAC pedal - Injection molded nylon fiber composite body - Premium nylon glass fiber composite material is 28% stronger than nylon composite used by most leading brands - Nylon glass fiber blend does not get hung up on rocks - Non-offset symmetrical design gives the rider perfect weight distribution across the pedal, creating a very stable platform through rough terrain. - Large 113mm L x 103mm W footprint - True concave pedal body profile - 1.5mm of concave shape in the pedal body (per side) - 18mm thick at the center - Best-in-class 10 pins per side (8 replaceable steel pins, and 2 fixed nylon pins) - 2 sealed bearings with oversized DU bushing design is robust and reliable - Open channeling for optimized mud and snow shedding capabilities - Not the average plastic disposable pedal...the DEFTRAP Pedals are fully sealed, rebuildable, thin, and offer the same or better grip in comparison to a traditional aluminum pedal - Brilliant design for all types of riding (Trail, Enduro, Downhill, Dirt Jumping, Commuting) - 391 grams per pair
Crank Brothers Candy 1
$59.99
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years
Crank Brothers Candy 1
$59.99
Crank Brothers' Candy pedals combine 4-sided cages for super-easy entry/exit with composite platforms for top-notch support. The Candy 1s feature chromoly axles for durability, extra secure springs, and an open design to quickly shed mud, making them ideal for sloppy conditions and cyclocross. They keep your feet close to the axles for maximum pedal power, too.
Crank Brothers Double Shot 1
$59.99
Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip. - Premium brass cleats with shims included - Q-factor: 57mm - Release angle: 15° / 20° - Forged 435 Chromoly steel spindle - 300 series stainless steel spring - 5-year warranty - 331g per pair
Shimano PD-M540 Pedals
$69.99 - $85.00
Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings. - 352 grams (pair)
Crank Brothers Stamp 2
$79.99
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details - Optimal surface area - Minimal profile 16mm thin - 10 adjustable 8mm pins per side for grip - 10mm pins available for purchase here - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Serviceable, pedal refresh kit available Specs - Adjustable pins: 10 per side - Body Material: A380 Aluminum - Endcap: T15 - Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large) - Inner Bearing Type: Igus Bearing - Max Rider Weight: No restriction - Outer Bearing Type: Double Cartridge Bearing - Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large) - Spindle Material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 439g per pair (Small), 494g per pair (Large)
Crank Brothers Stamp 2
$79.99
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface. - Optimal surface area - Minimal profile 16mm thin - 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us); 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (us); 43-49 (EU) Specs: - Spindle material: forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Inner bearing type: IGUS LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Footprint: 114mm x 111mm (Large); 100mm x 100mm (Small) - Weight: 470g per pair (Large); 415g per pair (Small) - Warranty: 5 years
Shimano PD-EH500 Pedals
$80.00
PD-EH500 pedals FEATURE - One side SPD, the other side flat - Light action binding makes frequent stepping-in & out easier - Better grip on flat side for wet condition BENEFIT - Convenient road touring pedal - Optimized for urban riding - Multi-condition - Best match with CT or MT shoes
Deity Components Black Kat
$114.00 - $119.99
The BLACK KAT Pedal is the perfect blend of weight, size, performance, feel, and the durability you expect from DEITY. Built around a larger double sealed bearing system, our goal with the BLACK KAT was to create a pedal that would not only feel incredible underfoot, but would last the test of time. With an exceptionally detailed extrusion we were able to bring incredible detail to you for an amazing price! The larger platform, thinner body and over all lighter appeal puts the BLACK KAT pedal in the perfect position to round out the best line of platform pedals on the market today. We’ve maximized every opportunity to elevate the BLACK KAT pedals by utilizing a concave shape to the platform, rounded edges at the spindle, traction grooves throughout and we even included an additional pin kit with every purchase … these babies are a one-time purchase for the life of your pedals and our gift back to you for the investment!
Deity Components Black Kat Pedals
$119.99
Black Kat pedals are built around a larger double-sealed bearing system, with a larger platform, thinner body and overall lighter appeal. These pedals bring great value by utilizing a concave shape to the platform, rounded edges at the spindle, traction grooves throughout, and included an additional pin kit with every purchase. - Extruded and CNC Machined 6061 T6 Aluminum - 100mm x 100mm platform - Concave body - Fully Serviceable DU Bushing and Double Micro Sealed Bearing System - Intended Use: Downhill, FR/DJ, Enduro, All Mountain - Allen bolt style pins - Additional Allen Pin kit included - 9/16"
Shimano Deore XT M8100 Pedals
$125.00
- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)
Crank Brothers Double Shot 3 Pedals
$129.00
Crank Brothers' game-changing hybrid pedal is now available in a trail-ready version designed for more aggressive riding styles. Details - Hybrid pedal half flat / half clip-in - 8 adjustable traction pins and textured finish for grip - Wide 57mm q-factor for stability at speed - Diamond plate pads for traction - 2-sided entry / superior mud shedding - Premium bearings & double seal system Specs - Adjustable pins: 8 per side - Body material: A380 aluminum - Cleats: Premium brass cleats with shims included - Inner bearing type: Igus LL-glide bearing - Max rider weight: No restriction - Outer bearing type: Enduro cartridge bearing - Q-factor: 57mm - Release angle: 15° / 20° - Spindle material: Forged scm 435 chromoly steel - Spring material: 300 series stainless steel - Warranty: 5 years - Weight: 403g per pair - Wing material: Cast stainless steel
Shimano Deore XT T8000 Explorer Dual-Platform Pedals
$130.00
The Shimano Deore XT Explorer Dual-Platform Pedals combine the efficiency of the SPD system and the convenience of a platform pedal, all in a lightweight package. - One side SPD, one side platform - Two-sided flexibility and performance - Ideal for trekking - Customize the entry and release tension settings - 392 grams - Concave cleat clearance on platform side - High-grip pins - Sealed cup and cone bearings
Deity Components Bladerunner
$142.99 - $149.99
Our lightest and thinnest pedal to date, the BLADERUNNER pedal has become synonymous with peak performance and endurance. The perfect platform pedal for any application, this super-minimized design is 11mm thin with a platform large enough for incredible stability. It thrives in the most technically challenging conditions possible. When ground clearance is a priority, you will be hard pressed to find a pedal more suitable for rocky terrain. We've left no detail unrefined with this masterpiece – down to the additional pin kit included with purchase and load-distribution system to prevent bearing blowout from side impact – these pedals are yet another DEITY design that sets the bar for excellence. - Extruded and machined from 6061 T6 aluminum using Deity dies - Thin 11mm profile at the exterior edges - 103mm x 100mm footprint - Concave pin profile - Load-distribution system to prevent bearing blowout - Multi-micro-sealed bearings and Deity DU Bushing internals - 10 allen bolt pins per side keep your feet glued - Machined traction grooves - Minimal material in key areas to shed weight and mud build-up - Stepped black polished Cr-Mo axle is compatible with 8mm allen keys or also a standard 15mm pedal wrench - Fully serviceable without requiring removal from the bike - Rebuild kits available - Pedals come with an extra set of pins for backups - Weight: 370 grams (pair)
Deity Components Bladerunner
$142.99 - $149.99
Our lightest and thinnest pedal to date, the BLADERUNNER pedal has become synonymous with peak performance and endurance. The perfect platform pedal for any application, this super minimized design at 11mm thin with a platform large enough for incredible stability, the BLADERUNNER thrives in the most technically challenging conditions possible. When ground clearance is a priority…you will be hard pressed to find a pedal more suitable for rocky terrain. We’ve left no detail unrefined with this masterpiece – down to the additional pin kit included with purchase and load distribution system to prevent bearing blowout from side impact – these pedals are yet another DEITY design that set’s the bar for excellence.
Deity Components TMAC
$168.99 - $179.99
What a statement the TMAC pedal has become! A beautiful marriage between rider feedback and designer experience, the TMAC Signature Tyler McCaul Pedal truly is “Your Dream Pedal”. With over two years of development, including multiple molds, prototypes and months of real world testing, the proof is in the end result. One of the most concave designs on the market today, the control and contact delivered by the TMAC pedal is unmatched. Rated as one of the top 2 best pedals on the market by VitalMTB with countless rave reviews and endless rider testimonials, we are incredibly proud to prove that rider feedback, dedication to perfection and the freedom to take a risk are the recipe for brilliance! Not only does the TMAC pedal give you precise control, but with a non-offset design you have more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design allowed us to make a pedal that feels like the largest pedal ever made at a mere 110mm x 105mm footprint. The machining detail alone makes this pedal a work of art and we guaranty you’ll be blown away with the feel and performance of these pedals… These truly are “Your Dream Pedal”!
Crank Brothers Mallet E LS
$169.00
The ultimate pedal for enduro riding and racing, with a longer spindle. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Adjustable Pins: 6 per side - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 57mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 424g per pair - Wing Material: 17-4PH stainless
Deity Components TMAC Pedals
$179.99
TMAC Signature Tyler McCaul Pedal. With over two years of development, it features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint. - Tyler McCaul signature pedals - 110mm x 105mm footprint - Super-concave 2.5mm deep pedal profile per side - 14mm thin at the center - Symmetrical pedal profile for added foot support and stability - Dual sided pins with pre-applied Loctite - Includes extra set of back-up pins - Load distribution system to prevent bearing blowout - Multi-micro-sealed bearings and Deity DU Bushing internals - Heat-treated chromoly spindle that is compatible with a standard 15mm wrench or 8mm allen - 9/16"
Page 1 of 2 Next page