Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Grips

ESI Silicone Tape 10'
$8.99
Keep adhesives off your bike! This is the finishing tape included in our RCT Wrap Kits. If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself or to our silicone grips, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products. BENEFITS: ESI Silicone Tape has some of the same benefits as our grips. It is heat resistant, made in the USA, and long-lasting. Not to mention it's military-grade! - Easy to Install - Hassle Free - Self-Bonding - No Residue - No Adhesives - UV Resistant NO CLEAN UP: The best part of our tape is when you are done with it, cut it off, and throw it away. No Clean up needed! USES: There are countless uses for our silicone tape. One awesome use is it makes a great chainstay protector. Also, wrap it under mounts to keep your lights, cameras, GPS, etc. from rotating and scratching your bars. Basically, anything you use adhesive/electrical tape on you can now use ESI Silicone Tape instead without the mess. With 10ft in a roll, you can get numerous chain stay protectors and custom tape jobs. Some other great uses include: - Tool Handles - Finishing Tape - Protecting Wear Points - And Much More The possibilities are endless!
MSW HBT-100 EVA Bar Tape
$10.00 - $14.99
Traditional EVA tape looks great on the bike and feels comfortable on the hands no matter how long the ride. EVA tape is flexible and comes with an adhesive backing so it wraps well and stays put during and after installation. - EVA vibration-damping foam increases grip and comfort - Adhesive backing for perfect bar placement - 78 inches (200cm) per roll - Finishing strips and bar end plugs included
ODI Lock Jaw Clamps with Snap Caps
$10.00
ODI Lock Jaw Clamps are designed exclusively for use with the ODI Lock-On Grip System.
ODI Lock-On Grip Clamps
$10.00 - $17.90
- Aluminum clamps secure the grip on both ends with a hex-broach pinch bolts - For 22.2mm (7/8") bars - Packaged for 1 pair/set of grips and includes Snap Cap end plugs
ODI Flangeless Longneck
$10.95
The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange! - Classic mushroom style collapsible rib pattern - Constructed of our proprietary Soft Grip compound for added comfort - Increasingly popular with top athletes around the world - Open ends with black and white Two Color Push In Plugs end plugs included
ODI Longneck ST BMX Grips
$10.95
The classic Longneck ribbed grip pattern with an open end to accomodate end plugs. - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip compound for comfort and durability - The grip of choice for top athletes around the globe - Open ends with Thug Plug end plugs included
ODI Soft X-Longneck Grips
$10.95
The classic flangeless Longneck ribbed grip pattern with an open end to accommodate end plugs now gets an extra 25mm of length! PRODUCT FEATURES: - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip SOFT compound for added comfort! - Increasingly popular with top athletes around the world - Open ends with Push In Plugs end plugs included - Sold In Pairs - 160mm
SDG Slater Jr. Grips
$16.99
- 1-piece, integrated Lock-On grip. - Exclusively fits 19mm bar ends. - Dual Density Design. - Smaller 25-26mm outer diameter. - Smaller 115mm length. - Tapered and slotted core to eliminate slippage. - Plush SDG Icon pattern for superior grip control and vibration dampening.
ODI F-1 Series Float Grips
$18.95
F-1 Series Float Grips are made from our exclusive A.I.R.E. compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Micro-textured surface pattern improves tackiness and control - Smooth profile for a consistent feel
ODI F-1 Series Vapor Grips
$18.95
F-1 Series Vapor Grips are made from our exclusive A.I.R.E compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Added surface pattern provides improved grip in all conditions - Ergonomic finger cutouts for a better gripping surface and improved control
ESI Chunky Grips
$18.99
Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
PNW Components Loam Grip
$19.00
We can't promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all-new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter and long days in the saddle. The Loam Grip features two contrasting patterns, and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip's surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design combats compound deterioration, ensures the grip is absorbing more vibration, and provides needed structure to support the additional body weight pressing down on this area. The Loam Grip was purpose-built for Enduro/Trail riding, and with that in mind, picking the compound was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. We call this the "happy camper" blend because it strikes a balance between an ultra-soft material that wears too quickly and a harder compound that provides no tactile benefits. - Diameter: Avg. 30mm - Weight: 90g/pair - Width: 133.5mm - Durometer: 25A Happy Camper Compound - Clamp Style: Closed End, single clamp
SDG Thrice 31 Grips
$19.99
- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends
SDG Thrice 33 Grips
$19.99
- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends
ODI Ruffian Lock MTB Grips
$20.00
- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)
ODI Ruffian Lock-On Grips Bonus Pack: Black
$20.00
The ODI Ruffian Grips feature exceptional control in a low profile grip designed specifically for racers. Bonus pack includes grips, Lock Jaws and Snap Caps
ODI SDG Lock-On Grips
$20.00
When two companies known for creating comfortable products collaborate, you know the results are going to be good. THE SDG GRIP FEATURES: - A Unique circular ribbed dampener which spread pressure across your palm while still providing excellent control - The front side of the grip features ergonomically ramped logos that act like hooks for your fingers and provide excellent traction when hanging off the rear of the bike - Lock-On Grip System = 100% Slip Free performance - Includes Snap Cap End Plugs - Color match to your SDG Duster seat
ODI Troy Lee Designs Lock-On Grips
$20.00 - $28.95
We’ve enlisted the help of our good friends over at Troy Lee Designs to help put an artistic spin on a quality design. After hundreds of drawings and designs, we’ve developed the most innovative grip yet. Troy’s the kind of guy that will make you throw all of your conventional processes out the window in order to make something for the World’s Fastest Racers. With that, we introduce the ODI / TROY LEE DESIGNS LOCK-ON MOUNTAIN BIKE GRIP. Quality and Innovation that can only be found by combining two World Leaders. Grooved Channels prevent mud and water buildup Overmolded flap gives added protection on outside clamp Unique Undercut pads give slim comfortable feel with the ultimate amount of grip Custom flanged design provides hand support with more usable grip surface etched inside clamp provides clocking system to assist on installation
Deity Components Knuckleduster
$21.99 - $22.00
The grip of choice for World Cup-style assassin and gloveless wonder, Sam Blenkinsop, the KNUCKLEDUSTER embodies our attention to detail and our focus on function! Not only have we developed our TRC rubber blend that gives you remarkable grip with incredible durability, the KNUCKLEDUSTER also features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and, coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel in a stunning package. Featuring a mushroom pattern to minimize vibration, the true magic of the KNUCKLEDUSTER lies in the V channel chevron ribs that ergonomically fill the swell of your palm and then seamlessly transition to a recessed half waffle on the underside. Why is this magic? All half waffle patterns are outboard and are notorious for creating hot spots on long rides. By designing the top to seamlessly transition to a recessed half waffle pattern, your fingers sit perfectly into the grip and allow you full control even in the roughest of conditions without being plagued by hot spots or blisters. The KNUCKLEDUSTER grips truly are an "all day grip" that allow you to keep it Pinned Wide Open at all times! - The benchmark in grip design - DIRT MAG Top 100 Product for 2018 - Featuring DEITY TRC rubber compound for exceptional durability - Tapered inner sleeve to ensure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black-ano 6061-T6 aluminum clamps - Short and wide rib design for added comfort with no side-to-side play - Half-waffle recessed design for added control without hot spots - Chevron v-channel design for your palm swell to give an ergonomic feel - Seamless transition through the end of grip for comfort - 132mm length with 32mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle and DH - 101 grams for the set
Deity Components Knuckleduster Grips
$21.99 - $22.00
The grip of choice for World Cup style assassin and gloveless wonder, Sam Blenkinsop, the KNUCKLEDUSTER embodies our attention to detail and our focus on function! Taking a risk and thinking outside the box is where DEITY thrives and these are certainly case in point! Not only have we developed our TRC rubber blend that gives you remarkable grip with incredible durability, the KNUCKLEDUSTER also features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel in a stunning package. Featuring a mushroom pattern to minimize vibration, the true magic of the KNUCKLEDUSTER lies in the V channel chevron ribs that ergonomically fill the swell of your palm and then seamlessly transition to a recessed half waffle on the underside. Why is this magic? All half waffle patterns are outboard and are notorious for creating hot spots on long rides. By designing the top to seamlessly transition to a recessed half waffle pattern, your fingers sit perfectly into the grip and allow you full control even in the roughest of conditions without being plagued by hot spots or blisters. The KNUCKLEDUSTER grips truly are an “all day grip” that allow you to keep it Pinned Wide Open at all times!
Deity Components Lockjaw
$21.99 - $22.00
With sweeping transitions from the padded thumb area to the deep-dish diamond top pattern to a recessed half-waffle, the LOCKJAW delivers a technically precise feel from end to end. Utilizing our TRC+ rubber compound allows us to maintain industry-leading durability delivered in a soft, plush, and sticky durometer. By combining our tapered inner sleeve and single lock ring system, coupled with our new extra-grippy rubber and recessed half waffle, the LOCKJAW gives you an extremely responsive-feeling cockpit. If you are looking for the ultimate control at your fingertips, the LOCKJAW continues to elevate the renowned DEITY Grip line to new levels. - Padded thumb area for comfort and smooth transitions - Recessed half-waffle design for added control without hot spots - Deep dish DEITY diamond pattern compresses for comfort but also provides unrivaled traction - Featuring soft DEITY TRC+ rubber compound for durability and increased grip - Tapered inner sleeve to ensure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black-ano 6061-T6 aluminum clamps - Seamless transition through the end of the grip for comfort - Capped end for safety and comfort - 132mm length with 32mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle / DH / and any other riding style of choice! - 104 grams for the set
Deity Components Supracush
$21.99
We've redeveloped our TRC+ rubber compound to deliver 33% more grip and cushion without compromising the amazing durability you've come to expect from all DEITY Grips. Rounding out our grip line to offer something for everyone, the SUPRACUSH Grip delivers the most comfortable and deeply cushioned grip on the market. It's the perfect grip for riders of any hand size looking for increased vibration damping, a larger feeling grip, or a more supple ride. Not only does the SUPRACUSH give you an unmatched level of cushion with our TRC+ rubber compound, but the larger deep-dish diamond pattern offers the most comfortable grip possible without compromising control, precision, or durability. - 34mm outer diameter with plush cushioning throughout - Deep-dish DEITY diamond pattern compresses for comfort but also provides traction - Features soft DEITY TRC+ rubber compound for exceptional durability and increased grip - Tapered inner sleeve to insure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black ano 6061 T6 aluminum clamps - Seamless transition through the end of the grip for comfort - Capped end for safety and comfort - 133mm length with 34mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle / DH / and any other riding style of choice - 118 grams for the set
Deity Components Waypoint Grips
$21.99
The perfect complement to our all new DEITY line of grips, the WAYPOINT are a Mountain Biker’s dream! Built around a smart tapered internal sleeve that eliminate any chance for play once fully tapped onto your handlebar and coupled with the single bolt lock-on clamp, the new DEITY line of grips left no detail unexplored. Our TRC rubber blend delivers an incredibly resilient tactile performance for improved durability with an amazing feel right out of the packaging. A diamond pattern is a beloved texture for a MTB grip and is often used, but rarely maximized. Eager to deliver you a diamond pattern grip that was slightly larger in outer diameter to the standard norm, the design of the WAYPOINT was born. Featuring a 31mm outer diameter, the body of the WAYPOINT seamlessly transitions to the end of the grip allowing you the room to stretch out on epic climbs, to maximize every mm of available grip, and to avoid having to have your hands on metal clamps. Available in a perfect match to all of our color offerings and featuring a debossed 3D DEITY Icon capped end for subtle style, the WAYPOINT deliver unmatched traction, durability, and class!
ODI Rogue Lock-On MTB Grip Core
$22.00
The Rogue grips feature soft, large raised pads to provide extra shock absorption. - Made in the USA by ODI - Lock Jaw clamps sold separately
ESI Extra Chunky Grips
$22.99
The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
Race Face Half Nelson Lock-On Grips
$23.99
Race Face Half Nelson Lock-On Grips • Super-slim profile • Race Face MX style half waffle for extra grip security • Topographical moisture channels • Compatible with ODI lock jaw clamps
Race Face Love Handle
$24.99
What comes between you and the mountain bike you love? The Love Handle, a very thin profile, double lock-on grip featuring Race Face's durable yet super tacky silicone compound that delivers long wear and all weather stickiness. The Love Handle is not only about its silicone good looks though, the palm area is contoured with channels to allow air to circulate and moisture to dissipate while the diamond pattern in the finger grip zone provides tons of control. Get a good grip; you won't want to lose these love handles! - Double lock on grip - Super slim low profile design with directional shape - Race Face's durable yet super tacky silicone compound won't wear out as quickly as typical grips and have a superior sticky feel even when wet - Directional design features contoured palm area with moisture dissipating channels and diamond patterned underside to enhance finger control and mitigate unwanted slips - Lightweight construction
Zipp Service Course Bar Tape
$25.00
Zipp's Service Course Bar Tape offers excellent cushioning and a fine grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.
ODI Vans Lock-On MTB Grip
$26.95 - $32.50
Two Southern California originals have teamed up to create a modern-day classic design. Featuring the classic Vans waffle sole pattern and constructed from ODI's proprietary grip compounds for a consistent feel that provides exceptional control in all conditions. Available as part of the patented Lock-On Grip System for guaranteed slip-free performance and simple installation. For MTB, BMX, ATV, and PWC applications. - Iconic Vans Waffle sole pattern utilizing ODI's proprietary grip compounds - Provides exceptional feel and control in all conditions - Aluminum clamps secure the grip on both ends using a hex wrench
Zipp Service Course Cyclocross Bar Tape
$27.00
Zipp's Service Course Cyclocross Bar Tape boasts extra padding for excellent cushioning and an exceptional grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.
Page 1 of 2 Next page