Other

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.

Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts

- Self Extracting crank bolt Suitable for: - Road: Powerbox alloy, Powerbox Supercompact alloy, Energy, Gossamer cranksets - Off-road: Powerbox alloy, KFX, Gradient cranksets

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Replacement lower hardware for Rockshox forks.

Salsa Pivot Service Kits

Derailleur shims for adapting front derailleur clamps to a different sized frame seat tube. - Derailleur = the size of the clamp on the front derailleur you have - Frame = the size of the seat tube the derailleur plus shim will fit

The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your post by lowering the travel and extended length of your post by as much as 50mm in any increment you like. Want an oh so fashionable 128.99mm drop? You got it! Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap, which is great for heavier riders. - Compatible with V1 Droppers only - 170mm Dropper Post - adjustable down to 120mm - 150mm Dropper Post - adjustable down to 100mm

CNC machined from advanced performance low friction polymer material, these replacement bushings offer improved fit while reducing friction over stock.

Brake Caliper Spacer Kit—203mm Rotor on 200mm Post Mount

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

The Problem Solvers Locking Headset Spacer is handy during headset servicing for keeping the fork in place when the top cap and stem are removed. It's also great for keeping the fork in the frame when you're shipping your bike in a box, which usually requires removing the stem and bars. This quality piece is for 1 1/8-inch forks and is CNC machined of light, durable 6061 aluminum and has a stainless-steel bolt.

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Replacement lower hardware for Rockshox forks.

Cane Creek ZN40-Bearing 41.8mm 45 x 45 Zinc, Each from Cane Creek.

- CNC machined 6061-T6 alloy - Extra long 72mm clamping lever - Provides extra leverage - 13mm clamp height

Saddle clamp heads and lowers for KS Dropper posts.

Replacement EBT screws close the bleed port on Magura brakes. - Torque spec: 0.5 nM - T25 head

This replacement bolt unit ensures your I-Spec II shifters, dropper levers, and/or brake levers are securely fastened. Make sure your controls are ready to rip.

KS Dropper Post Service Parts

Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit. Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders. - 210mm Dropper Post - adjustable down to 190mm - 180mm Dropper Post - adjustable down to 160mm - 150mm Dropper Post - adjustable down to 130mm - 120mm Dropper Post - adjustable down to 100mm

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Cassette Seal: Fits all ratchet drive hubs

This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Actuators are at the bottom of the post and convert the cable pull to open the piston, allowing the dropper to move.