Skip to main content

Filter By:

Yeti

Yeti Cycles SB150 C1 (Limited)
$6,000.00
"Race bred"—it’s not just a slogan printed on the SB150 top tube. We’ve been pinning on numbers and pinning the throttle since 1985. Designed for shorter fork offsets, the SB150s headtube angle is slackened and the seat tube angle is way steeper. The reach is also longer with shorter chainstays. Advantage? All of these elements increase the DH prowess and move the rider forward on the bike. But these advantages are not one-sided. The steeper seat angle, short fork offset, and forward riding position also keep the front wheel on the ground, the power to the pedals, and the steering quick and nimble when climbing. - Forward bias posture—Gives racers the room they need, and centers them on the bike. - 20mm longer travel fork—Pairs well with our forward-biased frame matching the vertical wheel travel of the rear suspension. - Slacker headtube—Lower bottom bracket and longer wheelbase. - Tested to DH standards—High-impact strength carbon lay-up tuned to go fast and tested to DH standards.
Yeti Cycles SB130 C1 (Limited)
$5,600.00
The rebel yell of the middle child. Fed a steady diet of super-tech climbs. The SB130 was built to crush the biggest terrain. No trail "too" anything. Point it up or down. Enter a last-minute enduro just for the eff of it. We say no one bike can rule all. But the SB130? One bike that rules. The SB130 possesses a distinct, big mountain feel for riders constantly exposed to uncharted terrain. - Long reach—Puts riders in a balanced position perfectly centered on the bike, ready to tackle the unknown. - 150mm fork—Because our 130mm of rear suspension outperforms similarly stroked forks and pairs well with our more forward-biased position. - Front end doesn't wanter climbing and stays composed when pointed downhill—the rider position remains neutral. Low Slung, Long Drop Long stroke dropper post capability throughout the entire size range for greater agility. At home When You're Not The deeper you go, the higher you climb, the later you brake, the more comfortable SB130 becomes. Bottom line, the term "trail bike" gets used pretty liberally at Yeti. Balance, Achieved Refined for the unknown and everything in between the SB130's Switch Infinity provides a more progressive ride without affecting the anti-squat properties. Silence is TURQ Internally routed cable tubes from end to end for silent function and less translation of housing during suspension movement.
Yeti Cycles TEAM ISSUE REPLICA JERSEY -BLK
$45.00 - $85.00
Whether heading out for a race or just an epic day of riding, the new Enduro 3/4 Sleeve Jersey is your kit. The 3/4 length sleeves offer great protection and the lightweight, wicking fabric helps keep you cool and comfortable all day. And with limited-release, team issue replica options, you can feel like a world-class Enduro racer on any ride! Slim race fit Lightweight, wicking polyester/lycra fabric 3/4 Length sleeves
Yeti Cycles OS Yeti Pom Beanie
$30.00
Keep your noggin warm and toasty with a Yeti beanie. Sport your Yeti Beanie post-ride or if you are headed to your local drinking establishment. FEATURES - One size fits most
Yeti Cycles Old School Yetiman Tee
$30.00
Throw it back with the old-school look of the traditional sliding Yetiman logo. The tri-blend fabric gives this t-shirt a soft feel, great fit and wicking properties, making it a great choice for on or off the bike. FEATURES - Tri-blend fabric great for on and off the bike - 50% Polyester, 25% Cotton, 25% Rayon
Yeti Cycles Yeti Slant Ride Jersey
$30.00
Keep it simple with our slant logo on this clean and understated tee. The tri-blend fabric gives this t-shirt a soft feel, great fit and wicking properties, making it a great choice for on or off the bike. FEATURES - Tri-blend fabric great for on and off the bike - 50% Polyester, 25% Cotton, 25% Rayon
Yeti Cycles XC Derailleur Hanger
$10.00
Replacement derailleur hanger for the 575, as-r, as-r carbon, as-x, and more. Nearly every Yeti model with a standard QR dropout. Sold as single hanger (includes 2 mounting bolts)
Page 1 of 1