Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$220.00 - $290.00
$290.00
Up to 24% Off
With its completely new, 4-piston S4 caliper, SwingLink lever cam, and carbon lever blade, SRAM's 360-gram Guide Ultimate stands alone as leader in its class. It has been engineered to be light and powerful, with superior heat management capabilities, which give you better, more consistent, more reliable braking. The new caliper design also incorporates a redesigned seal and aluminum piston interface for ease of setup and improved consistency, while Bleeding Edge technology makes bleeding the Guide Ultimate a quick and easy task.
$225.00 - $280.00
$280.00
Up to 20% Off
For the Ultimate, we held nothing back. Our engineers sculpted the finest materials—titanium and carbon fiber—to make this our lightest four-piston brake ever. The power, modulation, and lever feel set a new standard. Personalization is quick and intuitive. And for performance—well, our test riders didn't dub it the "Mini-Code" for nothing.
- More caliper stiffness and a new pad compound with bite
- Pivot bearings for crisp lever feel and a fatigue-free ride
- SRAM's best power-to-weight ratio in a four-piston brake
$249.99 - $250.00
Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop!
Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness.
With a motorsports-inspired Two-Stroke dual port bleed system, industry-leading DOT 5.1 fluid and Kevlar hose, the hydraulic system is engineered for ultimate performance across all temperatures and easy maintenance.
Dominion A4 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise.
Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand.
Key Features:
- Tool-Free Reach Adjustment
- Flip-Flop Lever Orientation
- King Pin Pad Retention
- Crosshair Caliper Alignment
- Two-Stroke Dual-port bleed system
Specifications:
- 310g (100cm hose and mount hardware)
- DOT 5.1 Fluid
- Tool-Free Reach Adjustment
- 2-Stroke Dual Port Bleed System
- Sealed Cartridge Bearings Lever Pivot
- 100cm Front Hose Length
- 180cm Rear Hose Length
$125.00 - $194.00
$194.00
Up to 36% Off
G2 RSC is the half-ton pickup truck of the mountain bike brake world—dependable, go anywhere, do anything, plenty of power when you need it, and all of the features you need. The new G2 RSC is based on the SRAM Code design, so it puts Code-like power and modulation into a mini-Code package. And, of course, the signature Guide lever-feel and contact-point adjustability ensures that this brake works great for every rider.
The G2 RSC presents a rider-oriented offering with an alloy blade, lever pivot bushings, stainless steel hardware.
- Useful reach and contact point adjustments for every type of rider. We design our brakes to give each individual rider distinct control of their ride.
- We added stiffness in the caliper and a new pad compound that offers more bite to really deliver the Mini-Code feel.
- Engineered for easy installation
$189.99
Extreme stopping power. 30% less time lag and 10% more braking power – figures that even a super hero would be proud of!
- Designed for the toughest enduro trails out there!
- Mounts: Front or Rear
- Disc Mount: Post Mount 74mm
- Quicker rebound between actions maintains rider concentration
- Greater flexibility and action-optimized
- Quicker brake engagement with shorter free stroke
- 10% more braking power (versus M9020)
- 8% stiffer for better performance (vs M9020)
- Series: XTR M9100 Series
- Brake Hose compatible: SM-BH90-SBM (not included)
- Compatible with I-Spec EV shift levers
- Oil compatible: Shimano Mineral oil (not included)
- Brake Caliper: 4-piston
- Brake Pads: N04C metal pads w/fins (Ice Tech)
- Includes 1 Brake Caliper Only
$186.99
With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7120 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7120 4-piston caliper is optimized for the toughest enduro trails.
- 10% stiffer than previous generation M7000, even under high-temp conditions
- Quicker brake engagement with shorter free stroke
- Tool-free lever reach adjustment
- I-SPEC EV Clamp Band enables optional integrated shifter setup
- Includes finned metal pads
$185.00
Our legendary full-powered brake now features a new technology to improve your cockpit aesthetic: Stealth. The all-new lever body design brings the hose closer to the bar, allowing for a sleeker, more modern ride. And for ease of customization, Code Bronze features tool-free Reach Adjust. Control is everything, and better rides begin with the confidence that your brakes will be the same, every time.
- Stealth body design to complement our AXS cockpit
- Designed for the most heavy-duty braking needs
- Metallic pads come standard for more power and longer wear
- Utilizes SwingLink for a fatigue-free ride
$158.00 - $167.00
Sleek, easy to use, yet immensely powerful. Code R packs a winning punch with a reliable DirectLink lever mated to Code’s new oversized four-piston caliper. SRAM’s signature ergonomics are supplemented by the tool-free reach adjust for a fit to each riders’ needs, to unleash Code’s superior braking power, consistency, and modulation.
- Four aluminum pistons provide the stopping power and excellent heat management
- Stainless steel heat shield breaks the thermal connection between the brakes pads and the caliper body, which reduces fluid temperature
- Forged aluminum lever body and blade
- Bleeding Edge design for easier maintenance
- Includes steel-backed sintered metal pads
$149.99
Replacement master cylinder lever assembly for Hayes hydraulic disc brakes.
$141.00
- Disc brake caliber assembly
- Assembled
- No hose
- Code R B1/RSC A1
$129.99
In 2016, TRP began working with reigning world cup champion, Aaron Gwin, to redesign our DH-R EVO brakes. Out of the gate, he was impressed with the initial level of performance, but he did have a list of improvements needed to achieve world cup-winning performance.
Working closely with the TRP development team, improvements were made in nearly every part of the brake and tested on the world cup circuit throughout the season.
We took most of the changes made to the DH-R EVO brakes and put them into the Slate T4. This brake features the same ergonomic lever made from cast aluminum and a forged/CNC'd caliper, both of which were given a matte black finish. It also features a new and stiffer 5.0mm hose for easier internal routing and better transfer of hydraulic power. Riders will also find benefits in the four-piston caliper, tool-free reach adjust, and top-loading caliper.
NEW CNC ADAPTERS
- CNC machined
- Increased stiffness and clean fit
- Simple information marking
NEW BRAKE PADS
- New performance resin compound
- Increased thermal stability
- Shorter bed-in process
NEW MINERAL OIL
- Lower viscosity for better fluid flow
- Increased heat stability up to 230 oC
- Easier to bleed
ERGONOMIC LEVER BLADES
- Lightweight aluminum body
- Ergonomic single finger positioning
- Dimpled accents for better grip on the trail
NEW 5MM HYDRAULIC HOSE
- Increased stiffness for better hydraulic pressure
- Increased thermal stability
- Easier to work with for internal frame routing
$84.00
- Special patented interlocking of the outer and inner rings (Dovetail Interlink Technology) giving optimum braking performance even under heavy loads
- In addition, maximum heat resistance and stability
- E-Bike optimized
- 6 steel mounting screws included
$72.00 - $84.00
SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.
$64.99 - $77.00
Shimano RT-EM810 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. The Ice Tech Freeza design significantly reduces heat build-up in the system to ensure consistent, high-performance braking even on the steepest downhill stretches. Shimano's Center Lock mounting system makes installing and removing rotors quick and easy thanks to the spline mount and lock ring design.
- For use with E-Bike Speed Sensor systems
- Recommended Brake kit: M9120/M8120/M7120
$75.00
Shimano XT RT86 6-Bolt Disc Rotor
- 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors
- Aluminum spider
- Includes rotor fixing bolts and non-turn washers
- Hub/Disc Compatibility: 6-Bolt Disc
- Weight: 173 g
- Rotor Size (mm): 203 mm
- Rotor Type: Two Piece
- Pad Compatibility: All Pad Compounds
$53.00 - $69.00
- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation
- New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint
- HS2 is more powerful, and quieter rotor with best-in-class heat management
$53.00 - $69.00
- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation
- New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint
- HS2 is more powerful, and quieter rotor with best-in-class heat management
- Hub Compatibility: Center Lock
- Disc Material: Steel
$55.99 - $68.00
Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design.
- Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade
- Quick and easy installation with spline mount and lock ring (included)
- Compatible with metal and resin pads
$60.99
Replacement Lever Blade for Dominion A2 & A4 Brake Kits. Bronze. SFL Option available.
$59.99 - $60.00
The D-Series rotor was developed in conjunction with the new Dominion disc brake, designed to provide consistent and reliable stopping power under all conditions.
- Proprietary friction surface, optimized for use with Hayes T106 (Semi-Met) or T100 (Sintered) pads to deliver fast, consistent burnish, predictable friction rate, and consistency across temperature and speed conditions
- MRC (Modal Resonance Cancellation): Tuned to cancel resonance and vibration, particularly when paired with Hayes T106 (Semi-Met) and T100 (Sintered) pads
- 1.95mm thickness enhances heat dissipation
- Includes mounting hardware
$50.00 - $59.99
TRP's new one-piece six-bolt disc rotor in 2.3mm thickness, coming in all sizes of 223 mm, 220 mm, 203 mm, and 180 mm. **For DH-R, DH-R EVO, Trail EVO and E-MTB Only** .
$47.00 - $59.00
Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.
$47.00 - $59.00
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant.
- Compatible with both road and mountain bike brakes
- Rounded edges are UCI-compliant and allow for easier wheel installs
- Hub interface: CenterLock
- Rotor Type: Centerline
$28.00 - $59.00
$44.00 - $59.00
Up to 43% Off
SRAM's Centerline Rotor delivers consistent, quiet and powerful braking. The rotor has a consistent center of friction throughout rotation to minimize vibration, so the only thing you'll notice about your brakes is how well they perform.
$59.00
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant.
- Rounded edges are UCI-compliant and allow for easier wheel installs (140mm, 160mm, 180mm, 200mm)
- Compatible with both road and mountain bike brakes
$58.00
Shimano Deore XT SM-RT86 6-Bolt rotors feature a 3-layer construction with an aluminum core and two stainless steel outer layers. Reducing rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors, the result is better braking performance and reduced brake fade.
- Aluminum spider
- Includes rotor fixing bolts and locking washers
$54.00
$59.99
10% Off
8 Series Disc Brake Pads
- Disconnected two piece back plate
- Race compound offers maximum stopping power for those who push their materials to the limits
- Set of four disc brake pads for one MT5, MT7 Caliper
$23.00 - $53.00
Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.
$38.00 - $52.00
Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design.
- Compatible with both resin and metal pads
- Includes external type rotor lockring
$51.00
Magura Storm SL.2 Rotor - 6-bolt silver
The Storm SL.2 disc brake rotor combines minimal weight with excellent braking performance. Perfect for sporty use.
Page 1 of 4
Next page