Other

- Aheadset preload adjusting bolt

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

We never just want to make something, that´s already there. We want to make something different, something better. Featuring a classy and costly CNC-Finish and a wonderful Titanium bolt, Squeezy is not just light with 7.9g @ 34.9/35mm. Unlike other seat clamps, Squeezy has a collar-less design. Collars are basically just a installation aid, to prevent the clamp from sliding down the seat tube, but in fact they locally stiffen up the clamp and hinder it from distributing the clamping force evenly. Squeezy acts like a thin metal band, that perfectly snuggles around the circumference of your seat tube and smoothly secures your seatpost in place. Compact design and the Titanium Torx T-25 bolt placed as close to the seat tube as possible allow even distribution of loads and dropper posts in particular can benefit greatly from smooth load distribution. 3 "Slip-Stopps" prevent Squeezy sliding down the seat tube during installation. Squeezy is available in various diameters to fit the most common seat-tubes. Please note, that this dimension refers to the seat-tube outer diameter and NOT to the seatpost specification. - 31.8mm - 34.9/35mm Features - extremely low weight: 7g (31.8mm) - material: Al-7075-T6, fine-feed CNC finish - collar-less design for more even clamping force distribution - Ti-6Al-4V titanium-clamping bolts Torx T-25 drive (please note, that Squeezies from first batch had T-20 bolts, but we figured, that was not a very smart choice) - "Slip-Stopp" installation aids

Triggy Alpha - The name speaks for itself - the new pack leader of dropper remotes. Since the beginning our Triggy has proven to be a favourite among many many pro riders and testers but with Triggy Alpha we have now set the bar even higher and we confidently say: There is no better remote on the market. The video is pretty much explaining very well what makes Triggy Alpha stand out amongst others: - Ball bearing on the paddle - Angle-adjustable paddle - Black anodized aluminum body and paddle with laser engraved finish - 2 available paddle lengths for crisp or soft dropper engagement - 2 mounting holes - Integrated cable tensioner - Direct mount for almost any brake available (see mounting options) - New cable clamping for universal dropper compatibility - Extremely low weight: 32g/34g (short/long) - Maximum cable pull: 11 mm The short version mimics our proven original Triggy paddle geometry. The long variant features a 7mm longer paddle and reduces the required forces by about 15%. Triggy Alpha is compatible with any commonly available aftermarket cable-actuated dropper post on the market. 1 set Triggy Alpha includes: - 1x Triggy Alpha remote (short or long) - 1x shift cable - 1x wire endcap - 1x BikeYoke Splits Clamp or I-Spec Adapter (optional)

Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings

Replacement bushings for Cane Creek shocks.

Allows the use of VALT springs with Fox coil shocks.

Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Cane Creek ZN40-Bearing 41.8mm 45 x 45 Zinc, Each from Cane Creek.

Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included - Stack height: 9mm

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. - Springs feature the progressiveness and ramp-up that hard-charging riders demand - Designed for use with Cane Creek Coil shocks - Progression begins at 50% into the stroke of the spring - Crafted from high-performance spring steel - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks

Chris King bottom bracket Fit Kits for DUB cranks are used with Chris King bottom brackets to ensure that cranks mate perfectly with bearings, extend product life, and reduce the potential for noise. Fit Kits will also allow you to use one bottom bracket with a wide array of cranks, if you happen to change you cranks in the future.

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets

- Brass cam bushing offers smooth lever action and secure clamping force - CNC machined aluminum collar and lever with 6mm bolt

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 15.4mm, for ratchet

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss 370/Onyx Service Kit: 2 pawls, spring and grease

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Service Kit - 3-Pawl

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240 Disc Ring Nut

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Cassette Seal: Fits all ratchet drive hubs

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 1526 Bearing for Rear Driveside Spline 1200, 2nd Generation Spline1501 and Dicut Disc Wheels

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 18307 Bearing