Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$34.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS49/30/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 49.61mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 58g
$35.00
Springs for Cane Creek DB Coil shocks. Available in a variety of spring rates for maximum customability.
$35.00
Springs for Cane Creek DB Coil shocks. Available in a variety of spring rates for maximum customability.
$35.00
Springs for Cane Creek DB Coil shocks. Available in a variety of spring rates for maximum customability.
$35.00
Springs for Cane Creek DB Coil shocks. Available in a variety of spring rates for maximum customability.
$42.00
This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
$42.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS56/40/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 65g
$52.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$52.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$62.00 - $90.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$63.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K|IS52/40/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 87g
$63.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS42/28.6/H9/K|IS52/40/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 42.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 84g
$73.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
$90.00 - $110.00
Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing. - Designed to bridge the gap between the 40-series and 110-series headsets
$99.99
Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. - Springs feature the progressiveness and ramp-up that hard-charging riders demand - Designed for use with Cane Creek Coil shocks - Progression begins at 50% into the stroke of the spring - Crafted from high-performance spring steel - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
$115.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!
$149.00
Cane Creek's AngleSet transforms your ride. It enables an effective head-tube angle adjustment of up to +/- 1-degree so you can fine-tune your mountain bike's front-end handling to best suit your riding style, local terrain and race course. Installation is straightforward because the AngleSet automatically adjust to fit different head tube lengths and angles. All AngleSet headsets have light, tough, and beautiful machined 7075 T6-aluminum cups with Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out.
$199.00
Cane Creek's AngleSet transforms your ride. It enables an effective head-tube angle adjustment of up to +/- 1.5-degrees so you can fine-tune your mountain bike's front-end handling to best suit your riding style, local terrain and race course. Installation is straightforward because the AngleSet automatically adjust to fit different head tube lengths and angles. All AngleSet headsets have light, tough, and beautiful machined 7075 T6-aluminum cups with Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out.
Chris King bottom bracket Fit Kits for DUB cranks are used with Chris King bottom brackets to ensure that cranks mate perfectly with bearings, extend product life, and reduce the potential for noise. Fit Kits will also allow you to use one bottom bracket with a wide array of cranks, if you happen to change you cranks in the future.
$20.00 - $29.00
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets
$24.00
All of Chris King's bottom bracket offerings will need an appropriate Conversion Kit specific to the brand and model of crankset to be used. - 73mm Threaded BB Shell - 24mm to 22mm Stepped Mountain Cranksets - Common Cranks: SRAM mountain, Bontrager mountain, TruVativ mountain, Zinn mountain - Conversion Kit required to work with the Chris King ThreadFit 24 bottom bracket
$29.00
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - Devolution baseplates are a stainless steel solution that allow Chris King headsets to adapt to a wide variety of steerer tube sizes - 30.0mm for 1.5 lower bearing and 1 1/8" steerer
$31.00
Our 1-1/8" NoThreadSet bearing cap features our patented GripLock (US Patent 8662517) retention design for exclusively reliable headset adjustment.
$154.00
Our Press Fit 24 bottom bracket is machined to aerospace-level tolerances to ensure that your bike has the precision fit that you have come to expect from Chris King’s legendary components. Each Press Fit 24 bottom bracket includes our exclusive fully serviceable made-in-house bearings that integrate with our easy-to-use grease injection system to create a bottom bracket with unparalleled performance and durability. - Engineered, manufactured and assembled in Portland, Oregon USA - 5 year built-to-last warranty - Easily serviceable with our integrated grease injection tool - Legendary in-house made bearings - Responsibly lightweight - Available ceramic bearing upgrade - Designed for BB shells with a 41mm ID (Inner Diameter) measurement - Conversion kits available for most crank sizes
$30.00
The Format is our first single clamp grip for those who like to make use of the full width of their bars, allowing you to run your hands right up to the edge. We had found some single clamp grips suffer from additional twisting, which is why we designed the sleeve to snugly fit the bars towards the ends. After examining wear patterns of grips that have been through the ringer, we implemented several different patterns and zones into the format to deal with the different dynamics going on in each part of your hand.
$46.00
- Brass cam bushing offers smooth lever action and secure clamping force - CNC machined aluminum collar and lever with 6mm bolt
$99.99
The versatile Trailmaster features a medium size platform and a rounded uninterrupted perimeter that is easy to get behind and move around without any snaggy or sharp edges. Medium-firm density foam with a padded nose is excellent for technical climbing and “body english” as well as all day epics. A flat sitting area with a central relief promotes sitting on your bones. The Trailmaster features a supple perforated natural leather top and Chromoly rails for durability.
$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
$11.99
Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.