Mountain

The Downhiller's XC Bike The Tallboy has earned a loyal following amongst those who seek a go-to bike that will hold up to the relentless hammering of "power hour" hot laps or long days in the saddle harvesting the best trails. The highly-refined VPP™ suspension on the Tallboy combines pedaling efficiency and all-out bump-chomping prowess. If ever there was a gravity riders’ XC bike, the Tallboy is it. Fully dialed at every size: Proportional Geometry and frame stiffness tune Chainstay length and seat angle are matched to the frame size (STA steepens and rear centre grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. We tailor stiffness for every size to make sure everyone gets the same ride quality. Bigger riders means greater stresses on larger frames, but that's remedied with our size-specific frame stiffness tunes. GLOVEBOX: ALWAYS WITHIN REACH Place your ride essentials securely in the Tallboy's downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse, tailored for the frame to keep your tools close to hand.

Lighten Up Everything Fluid FS, Now in Carbon Upping the ante on everybody's favourite Trail rig, the Fluid FS Carbon features a 600g lighter main triangle with all the strength and fine-tuned potential that experienced or evolving riders need. Right now, and down the trail, too. - Fluid FS Carbon - Intended Use: Trail - Frame Material: Carbon Main, 6061 Alu Stays - Frame / Wheel Size: S, M, L, XL / 29" - Suspension Travel – F: 140mm R: 130mm - Suspension Platform: Horst Link - Tire Size: 2.35" – 2.6" Additional Features - Ride Aligned Design System - Long Travel Dropper Posts (Up To 200mm) - Low Standover - Custom Tuned Rear Shock - Integrated Accessory Mount Hero-Thread the Needle Intuitive, precision handling to pick the perfect line. - Fluid's geometry, suspension kinematics and precision setup have achieved near-legendary status – so why mess with a success? Fluid Carbon delivers the goods on all types of trails with a little less junk in the trunk. Hero-Pushing the Envelope Design & features that'll continue to impress as skills progress. - Refining the ride and dropping 600 grams from a Trail frame benefits everyone – but only if it's up to the task. The Fluid Carbon aced every test we subjected it to-in the lab, and on the trail. Hero-Custom Tuned Suspension Sophisticated suspension components for precision performance. - Precision-engineered 130mm rear suspension features custom-tuned damping co-developed with shock manufacturers to provide a fully customized suspension setup and performance. Hero-Room to Move Long-travel droppers and generous standover get you through the rough stuff. - Long-travel, size-specific 34.9mm dropper posts, and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain. Hero-You Ask, Fluid Answers Refined design for ultimate Trail performance. - With balanced, progressive geometry, kinematics and superior pedal efficiency, Fluid FS Carbon tackles technical terrain with confidence, and attacks high speed pedaling sections with a big ol' grin. Hero-Ride Aligned Perfect fit, dialed handling and personalized setup in minutes. - The Ride Aligned Design System matches each Fluid FS Carbon to the human who rides it. Rider-first geometry and suspension kinematics are precision tuned in minutes with the Ride Aligned Bike Setup Guide.

The Revolver HT is the pinnacle of modern XC hardtail performance. Its high modulus carbon fiber frame is engineered to make the most of every Watt stomped through its pedals, with a progressive design that reduces fatigue, and provides attack-style handling on descents. If you're looking to win races – whether organized or deep within the part of your mind that you don't talk about at parties - the Revolver HT is what you're looking for. - Revolver Carbon XC frame with 100mm or 120mm fork options - Updated progressive XC geometry - Gravity Tune - 148mm Boost rear end - Tubeless ready with Stan's tape, valves and sealant - X-Fusion RC32 Air 120mm Fork - Shimano Deore 11 Speed Drivetrain RIDER BENEFITS: - RIDE ALIGNED: The Revolver HT uses Norco's Ride Aligned design system which matches each individual bike to the human who rides it, creating a customized platform that is both stable and balanced, allowing the rider to push harder. Using individual rider metrics, optimized geometry and fit and proprietary app technology, you'll align with your ride experience like never before. - LIGHTWEIGHT, STIFF & FAST: The Carbon fiber frame comes in four sizes, weighs in at a scant 1100g with paint (Size M). - MASSIVE CLEARANCE: Boost axle spacing provides gobs of clearance for 29x2.35 tires, so it's not just XC-Race compliant – it'll also rip on the trails to get every mile in that you can before sundown. - ONE-BY SPECIFIC: It's a harsh reality for luddites, but the front derailleur is a thing of the past for XC racers. The Revolver HT is a finely tuned machine, and we've eliminated all the extra fluff to make it the fastest it can be – and part of that is ditching the possibility of running a front derailleur. - RACE CALIBER, TRAIL WORTHY: Revolver HT is spec'd for XC with a lightweight 120mm fork, and also suits the needs of the performance trail rider with a dropper posts and 2.35" tires.

ALL SEASON EVOLUTION Balanced weight distribution for maximum traction and a powerful pedaling position keep the Bigfoot 3 charging forward all year. The redesigned Bigfoot elevates fat bike performance to downright fun, anywhere, anytime. The confident, aggressive handling tracks precisely where you want on a descent or technical trail, and the simple one-by drivetrain offers reliable, simple shifts with gloved hands. With maximum traction in the most extreme riding conditions imaginable, Bigfoot claws its way up, and the finely tuned steering geometry and massive tires provide confident, aggressive handling to rip back down. The Bigfoot excels in all-season weather and extreme terrain to make every ride big fun. PROGRESSIVE DESIGN Built from the powder-up with our holistic approach to fit & geometry. A combination of longer reach, slack head tube angle and steep seat tube angle gives every Bigfoot a powerful pedal position, increased climbing traction and added control when descending. FAT’S WHERE IT’S AT 75mm wide 27.5” rims and frame clearance for up to 4.6" tires to put more rubber onto whatever surface you're riding and allow for lower pressures and greater traction. FRAME FEATURES Evolved, thoughtful details make it even better. Generous standover clearance and extra stiffness provided by 12x197mm thru-axles and internally routed cables make the Bigfoot’s aluminum frame ideal for extreme terrain. WINTER RIDER Optimized for the cold, capable year-round. All models feature disc brakes with DOT fluid or cable actuation for consistent performance over varying temperatures. When included, dropper posts are spec’d for reliable cold weather performance. MULTI-FUNCTIONAL Frame details add versatility. Rack mounts in the rear, bottle mounts above and beneath the down tube and triple mounts on the fork give you the option of running a barebones setup or loading up for a massive excursion. STANDOVER HEIGHT Top tube clearance is critical in fat biking. Getting off the pedals in deep snow requires lots of space over the top tube. Bigfoot strikes a perfect balance between max clearance and making space for a frame bag in the front triangle.

The Sight C Frame Kit boosts your All-Mountain confidence with incredible descending capability, adept, sure-footed climbing, and efficient pedaling. To make the Sight Carbon, we had to re-think how you connect with the trail. With maximum front and rear wheel grip on climbs and descents, Sight C maintains momentum and cadence in technical situations and allows the suspension to move freely without absorbing drivetrain energy. Reasons It's Rad: - Precise tune and fit perfects every ride. - Max standover with long travel dropper posts. - Sweating the little stuff makes the ride better. - Four piston brakes with 200/180mm rotors. - Features the Ride Aligned Design System. Wheel size: Sizes Small – X-Large: 27.5-inch or 29-inch

The Torrent's modern features and new progressive All-Mountain design provide stable, agile descending, paired with climbing capability that would make a mountain goat jealous – perfect for any rider looking to bring their trail riding to the next level without the extra expense and complexity of rear suspension, and a new challenge for advanced riders trying to keep themselves honest. - New 29" 6061 DB Aluminum Torrent Frame - Progressive All Mountain Hardtail Geometry - Geo based around 150mm short offset 29" fork - Gravity Tune with short responsive chainstays - Slack 64 degree head angle RIDER BENEFITS: - PROGRESSIVE DESIGN: The Torrent uses Norco's holistic approach to fit and geometry to create the ultimate all-mountain hardtail experience. The unique combination of our next generation of Gravity Tune, longer reach, slacker head tube angle and steep seat tube angle provides a more forward weight distribution within a longer wheelbase. This allows more powerful pedaling, increased climbing traction and added grip and control when descending so you can confidently attack the rowdiest trails. - EQUIPPED TO DESCEND: To support riders through the lunacy that the Torrent's inspires, each bike is equipped with 4-piston disc brakes, shorter seat tubes, long-stroke dropper posts and aggressive knobby 29er tires. - BURLY METAL FRAME: For 2021, we decided to offer the Torrent in both steel and highly-engineered aluminum to give you some options for when you're fully committed to a burly line that you're fairly confident you can pull off. Steel has a reputation for being tough and compliant, and when it's engineered right, aluminum does, too.

ALL SEASON EVOLUTION Balanced weight distribution for maximum traction and a powerful pedaling position keep the Bigfoot S 1 charging forward all year. The redesigned Bigfoot elevates fat bike performance to downright fun, anywhere, anytime. The confident, aggressive handling tracks precisely where you want on a descent or technical trail, and the simple one-by drivetrain offers reliable, simple shifts with gloved hands. With maximum traction in the most extreme riding conditions imaginable, Bigfoot claws its way up, and the finely tuned steering geometry and massive tires provide confident, aggressive handling to rip back down. The Bigfoot excels in all-season weather and extreme terrain to make every ride big fun. PROGRESSIVE DESIGN Built from the powder-up with our holistic approach to fit & geometry. A combination of longer reach, slack head tube angle and steep seat tube angle gives every Bigfoot a powerful pedal position, increased climbing traction and added control when descending. FAT’S WHERE IT’S AT 75mm wide 27.5” rims and frame clearance for up to 4.6" tires to put more rubber onto whatever surface you're riding and allow for lower pressures and greater traction. FRAME FEATURES Evolved, thoughtful details make it even better. Generous standover clearance and extra stiffness provided by 12x197mm thru-axles and internally routed cables make the Bigfoot’s aluminum frame ideal for extreme terrain. WINTER RIDER Optimized for the cold, capable year-round. All models feature disc brakes with DOT fluid or cable actuation for consistent performance over varying temperatures. When included, dropper posts are spec’d for reliable cold weather performance. MULTI-FUNCTIONAL Frame details add versatility. Rack mounts in the rear, bottle mounts above and beneath the down tube and triple mounts on the fork give you the option of running a barebones setup or loading up for a massive excursion. STANDOVER HEIGHT Top tube clearance is critical in fat biking. Getting off the pedals in deep snow requires lots of space over the top tube. Bigfoot strikes a perfect balance between max clearance and making space for a frame bag in the front triangle.

The Sight A2 SRAM boosts your All-Mountain confidence with incredible descending capability, adept, sure-footed climbing, and efficient pedaling. To make the Sight Aluminum, we had to re-think how you connect with the trail. With maximum front and rear wheel grip on climbs and descents, Sight A2 SRAM maintains momentum and cadence in technical situations and allows the suspension to move freely without absorbing drivetrain energy. Reasons it's rad: - Precise tune and fit perfects every ride. - Max standover with long travel dropper posts. - Sweating the little stuff makes the ride better. - Four piston brakes with 200/180mm rotors. - Features the Ride Aligned™ Design System.

Whether you're carving down a steep loam line, dropping in for an enduro stage, or heading into the backcountry for an all-day epic, this bike performs. With increased rearward axle path, idler, and the innovative VPSHP suspension layout, this new design gives the Sight next level confidence and capability, up or down the mountain. With 160/150mm of travel, the 2024 Sight takes the best of the Range Platform and has tighten it up into a light, pedal friendly, maneuverable, high-pivot package. Available with a 27.5" rear wheel (MX), as well as 29" in some markets. Swapping the linkarm and lower shock mount with the "Missing Link Kit" converts between 27.5" and 29" to let you pick the wheelsize that suits you best while maintaining geometry and kinematics to ensure consistent fit and bike setup. - 29" with the option to change to 29"/27.5" with no compromise geometry and kinematics. - RockShox Ultimate suspension. SRAM Code Silver Stealth Brakes. - Race face carbon 30mm rims. - SRAM XO Eagle Transmission. - Weight (S3): 15.6 kg / 34.4 lbs - Ride AlignedTM – Perfect fit, dialed handling and personalized setup in minutes. - No Other Way Limited Lifetime Warranty

When the trail beckons you to traverse above tree line and into unmarked territory, the Joplin is ready to take you there. With its 120mm of VPP™ travel and 29-inch wheels, it’s the ultimate climbing partner to help you reach any summit. And when it’s time to point downhill, its head tube angle and slack geo will navigate the most rocky terrain. Whether you’re out on a solo adventure or a soul-lifting ride with friends, the Joplin will let you soar to new heights.

A downhill bike that goes everywhere Seriously. The Megatower’s big wheels, long travel, and tough carbon fiber chassis delivers the high-speed security traits of a downhill bike. Yet the relatively-steep seat tube angle and size-specific geo maintain the Mega’s mega pedaling ability—elevating its reputation as the perfect choice for big gravity rides and DH park laps. Design Details: Glovebox Place everything you need for a ride beneath the reassuringly high-quality latch and panel in the downtube, including your driving gloves. The Glovebox also comes with a Tool Wallet and Tube Purse, two refined pouches for keeping your essentials close to hand. Full carbon CC frame Carbon CC frames use the very best materials and production processes available, are made in our own factory, and have a lifetime warranty. Steeper seat tube angle The steep seat tube angle puts you in the right place to scale the steepest pitches to get to the wildest descents. Even better, it gets progressively steeper as the sizes get larger so everyone sits in the right spot. 165mm of VPP™ travel A relatively-low leverage ratio not only makes setup easier but delivers a more damped, controlled feel across the travel range. Coil and water compatibility Even with a lower-link flip chip and the option to run large-body shocks, like a coil, you’re still able to fit a water bottle inside the front triangle. Longer travel? 165mm of travel comes standard, but if you choose to run a shock with a longer, 65mm stroke, you can bump it up to 170mm. Details matter The frame details are completed with a neat mud flap that protects the rear shock, a rubberized downtube protector that shrugs off strikes, and tidy cable routing within the frame and swingarm. Proportional geo The Megatower's chainstay length is matched to the frame size so every rider, no matter their height, gets the same balanced geometry. Full size range From size small to XXL, no one misses out on the Megatower. SRAM Eagle Transmission - stronger, better shifting, wirelessly The next generation SRAM Eagle Transmission specced on our CC-carbon models is a radically robust, fully integrated and interdependent wireless transmission. Built around the universal constant of the wheel axle itself, the Full Mount hangerless attachment creates a far stronger connection to the frame and the super strong derailleur provides unprecedented strength. Shifting under load is made possible due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. The new AXS Pods are extremely ergonomic and highly customizable, so shifting gears is light and intuitive. It's simply the most advanced transmission and nearly as tough as the mountain itself.

A downhill bike that goes everywhere Seriously. The Megatower's big wheels, long travel, and tough carbon fiber chassis delivers the high-speed security traits of a downhill bike. Yet the relatively-steep seat tube angle and size-specific geo maintain the Mega's mega pedaling ability-elevating its reputation as the perfect choice for big gravity rides and DH park laps. SRAM Eagle Transmission - stronger, better shifting, wirelessly The next generation SRAM Eagle Transmission specced on our CC-carbon models is a radically robust, fully integrated and interdependent wireless transmission. Built around the universal constant of the wheel axle itself, the Full Mount hangerless attachment creates a far stronger connection to the frame and the super strong derailleur provides unprecedented strength. Shifting under load is made possible due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. The new AXS Pods are extremely ergonomic and highly customizable, so shifting gears is light and intuitive. It's simply the most advanced transmission and nearly as tough as the mountain itself.

THE MOUNTAIN BIKE, DISTILLED The newest version of the Hightower remains our greatest hits of engineering - now further refined and bottled into our most all-terrain of bikes. Big on wheels, medium on travel, and short on fuss, this is the do-it-all model that does it over and over again thanks to a versatile balance of geo, spec, and durability. If you’re not looking for extremes, just something extremely good, the Hightower is your elevator. Engineering Details: - OUR ENGINEERS’ GREATEST HITS Not all frames are created equal. Hightower represents Santa Cruz’s greatest hits, showcasing our design, engineering, and performance prowess. - LOWER LINK ASSEMBLY The highly sculpted and optimized Lower Link (A) houses a geometry-adjusting Flip Chip (B) and beefy Pivot Axles (C) to virtually eliminate lateral flex. - UPPER LINK ASSEMBLY We only use the highest quality Enduro MAX or TPX sealed, radial bearings (A) and premium fasteners (B) for our linkage assemblies. They’re easy to properly torque and maintain, plus we offer free replacement bearings for life. - ONE-PIECE SWINGARM VPP suspension utilizes a one-piece swingarm that eliminates the need for pivots on the stays, creating a stout, bulletproof rear end for accurate tracking and superior performance. - C AND CC CARBON Santa Cruz offers two grades of carbon—top-end CC Carbon and value-minded C Carbon. Though they have the same stiffness and performance, CC is lighter and comes paired with a more premium suspension. - CARBON MASTERY The Sag Window (A), Glovebox (B), and internal cable tunnels (not shown) demonstrate Santa Cruz’s expertise in combining practical function with carbon design and manufacturing artistry. - THE SUM OF THE PARTS In isolation, all these things are great—together with fanatical suspension tuning, a premium build spec, and meticulous attention to detail, they’re transcendent.

The Mountain Bike, Distilled. The newest version of the Hightower remains our greatest hits of engineering—now further refined and bottled into our most all-terrain of bikes. Big on wheels, medium on travel, and short on fuss, this is the do-it-all model that does it over and over again thanks to a versatile balance of geo, spec, and durability. If you're not looking for extremes, just something extremely good, the Hightower is your elevator. Engineering Details: - Our Engineers' Greatest Hits Not all frames are created equal. Hightower represents Santa Cruz’s greatest hits, showcasing our design, engineering, and performance prowess. - Lower Link Assembly The highly sculpted and optimized Lower Link (A) houses a geometry-adjusting Flip Chip (B) and beefy Pivot Axles (C) to virtually eliminate lateral flex. - Upper Link Assembly We only use the highest quality Enduro MAX or TPX sealed, radial bearings (A) and premium fasteners (B) for our linkage assemblies. They’re easy to properly torque and maintain, plus we offer free replacement bearings for life. - One-Piece Swingarm VPP suspension utilizes a one-piece swingarm that eliminates the need for pivots on the stays, creating a stout, bulletproof rear end for accurate tracking and superior performance. - C and CC Carbon Santa Cruz offers two grades of carbon—top-end CC Carbon and value-minded C Carbon. Though they have the same stiffness and performance, CC is lighter and comes paired with a more premium suspension. - Carbon Mastery The Sag Window (A), Glovebox (B), and internal cable tunnels (not shown) demonstrate Santa Cruz’s expertise at combining practical function with carbon design and manufacturing artistry. - The Sum of the Parts In isolation, all these things are great—together with fanatical suspension tuning, a premium build spec, and a meticulous attention to detail, they’re transcendent. Featuring: SRAM Eagle Transmission - stronger, better shifting, wirelessly The next generation SRAM Eagle Transmission specced on our CC-carbon models is a radically robust, fully integrated and interdependent wireless transmission. Built around the universal constant of the wheel axle itself, the Full Mount hangerless attachment creates a far stronger connection to the frame and the super strong derailleur provides unprecedented strength. Shifting under load is made possible due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. The new AXS Pods are extremely ergonomic and highly customizable, so shifting gears is light and intuitive. It's simply the most advanced transmission and nearly as tough as the mountain itself. Hightower 3 Highlights: - VPP™ VPP™ suspension can be optimized to strike the right balance between pedaling efficiency and all-out bump-chomping prowess. That means wherever you see "VPP" you know it's tuned to perform exactly how it should for the purpose it's designed for. - 145mm VPP travel Looking for something good at climbing, downhill, and going round and round your local trails? Say hello to Hightower. 145mm in the rear paired with 150mm up front is your perfect combo. - Suspension sensitivity Compared to the last Hightower, we reduced the anti-squat in the first 40% of travel. This noticeably improves suspension sensitivity in both climbing and descending scenarios due to reduced chain influence on the suspension. - Suspension consistency Hightower's leverage curve is relatively straight, with added progression towards the end of the travel. This provides improved bottom-out resistance with more consistent damping and support. - Glovebox Place your ride essentials securely beneath a new high-quality latch and panel in the Hightower's downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse, tailored for the frame to keep your tools close to hand. - Sag window A window allows easier suspension sag and setup. The details are completed by a neat mud flap to protect the rear shock plus tidy cable routing within the frame and swingarm, and rubberized DT protectors to shrug off strikes. - Flip chip In the Low position, the shock rate becomes more progressive, particularly at the end of the stroke, and there’s some bottom-out resistance to be gained. In the High setting, the bike rides a little higher in its travel and supplies the rider with more mid-stroke support. Tweakers and finicky shredders can adapt the suspension feel to their needs and desires. - 29-inch wheels Hightower features fast-rolling, bump-easing 29-inch wheels front and rear. On high-end builds, we spec Reserve 30|HD carbon rims laced to premium hubs, which are built and hand-tuned in our Santa Cruz, Calif. factory. See Reserve 30|HD wheels.

THE MOUNTAIN BIKE, DISTILLED The newest version of the Hightower remains our greatest hits of engineering - now further refined and bottled into our most all-terrain of bikes. Big on wheels, medium on travel, and short on fuss, this is the do-it-all model that does it over and over again thanks to a versatile balance of geo, spec, and durability. If you're not looking for extremes, just something extremely good, the Hightower is your elevator. Engineering Details: OUR ENGINEERS' GREATEST HITS Not all frames are created equal. Hightower represents Santa Cruz's greatest hits, showcasing our design, engineering, and performance prowess. LOWER LINK ASSEMBLY The highly-sculpted and optimized Lower Link (A) houses a geometry-adjusting Flip Chip (B) and beefy Pivot Axles (C) to virtually eliminate lateral flex. UPPER LINK ASSEMBLY We only use the highest quality Enduro MAX or TPX sealed, radial bearings (A) and premium fasteners (B) for our linkage assemblies. They're easy to properly torque and maintain, plus we offer free replacement bearings for life. ONE-PIECE SWINGARM VPP suspension utilizes a one-piece swingarm that eliminates the need for pivots on the stays, creating a stout, bulletproof rear end for accurate tracking and superior performance. CC CARBON Santa Cruz offers top-end CC Carbon, which is lighter and comes paired with more premium suspension. CARBON MASTERY The Sag Window (A), Glovebox (B), and internal cable tunnels (not shown) demonstrate Santa Cruz's expertise at combining practical function with carbon design and manufacturing artistry. THE SUM OF THE PARTS In isolation, all these things are great—together with fanatical suspension tuning, a premium build spec, and meticulous attention to detail, they're transcendent. SRAM Eagle Transmission - stronger, better shifting, wirelessly The next generation SRAM Eagle Transmission specced on our CC-carbon models is a radically robust, fully integrated, and interdependent wireless transmission. Built around the universal constant of the wheel axle itself, the Full Mount hangerless attachment creates a far stronger connection to the frame and the super strong derailleur provides unprecedented strength. Shifting under load is made possible due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. The new AXS Pods are extremely ergonomic and highly customizable, so shifting gears is light and intuitive. It's simply the most advanced transmission and nearly as tough as the mountain itself. Hightower 3 Highlights: VPP™ VPP™ suspension can be optimized to strike the right balance between pedaling efficiency and all-out bump-chomping prowess. That means wherever you see "VPP" you know it's tuned to perform exactly how it should for the purpose it's designed for. 145mm VPP travel Looking for something good at climbing, and downhill, and going round and round your local trails? Say hello to Hightower. 145mm in the rear paired with 150mm up front is your perfect combo. Suspension sensitivity Compared to the last Hightower, we reduced the anti-squat in the first 40% of travel. This noticeably improves suspension sensitivity in both climbing and descending scenarios due to reduced chain influence on the suspension. Suspension consistency Hightower's leverage curve is relatively straight, with added progression towards the end of the travel. This provides improved bottom-out resistance with more consistent damping and support. Glovebox Place your ride essentials securely beneath a new high-quality latch and panel in the Hightower's downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse, tailored for the frame to keep your tools close to hand. Full carbon CC frame Carbon CC frames use the very best materials and production processes available, are made in our own factory, and have a lifetime warranty. Sag window A window allows easier suspension sag and setup. The details are completed by a neat mud flap to protect the rear shock plus tidy cable routing within the frame and swingarm, and rubberized DT protectors to shrug off strikes. Flip chip In the Low position, the shock rate becomes more progressive, particularly at the end of the stroke, and there’s some bottom-out resistance to be gained. In the High setting, the bike rides a little higher in its travel and supplies the rider with more mid-stroke support. Tweakers and finicky shredders can adapt the suspension feel to their needs and desire. Proportional geometry Chainstay length and seat angle is matched to the frame size so every rider, no matter their height, gets the same balanced geometry. Across all sizes however, the headtube angle has been slackened to help stability at speed, lowered the bottom bracket to compliment the better supported suspension, and increased stack in favor of modern handlebar setups.

Fully dialed at every size: Proportional Geometry and frame stiffness tune. Chainstay length and seat angle are matched to the frame size (STA steepens and rear center grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. We tailor stiffness for every size to ensure everyone gets the same ride quality. Bigger riders mean greater stresses on larger frames, but that's remedied with our size-specific frame stiffness tunes. - VPP™ VPP™ stands for virtual pivot point - an engineering principal synonymous with high performance that spans from short travel platforms like the Tallboy right up to our DH World Cup-winning V10. - 120mm VPP™ Travel Some call 120mm "short travel", others call it all the travel you'll need. The Tallboy is an efficient XC pedaler with a geo and shock tune that makes it way more capable than the millimeters suggest. - Snappy Suspension The Tallboy has a lower starting ratio and an increased ending ratio of the leverage curve. This makes it really sensitive further into the travel and helps the bike ride higher in its stroke, producing a more responsive, snappy feel. - Bump Buster Significantly reducing peak anti-squat (over previous generations of the Tallboy), has improved both small bump sensitivity and square-edge compliance. And, because anti-squat values trend with ant-rise, we were also able to reduce the anti-rise to improve the braking sensitivity. - Glovebox: Always Within Reach Place your ride essentials securely in the Tallboy's downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse, tailored for the frame to keep your tools close to hand.

Whether you're ripping fast flowy singletrack, putting the power down on punchy climbs, or tearing the tires off in the corners, the Optic continues to push the boundaries of what's possible on a short travel trail bike. The new Optic with 140mm/125mm of travel condenses years of technology from our long travel bikes into a lightweight package that's as ready to tear up climbs as it is tackling challenging descents. The VPSHP suspension layout provides increased rearward axle path and an idler to manage pedal feedback, keeping Optic's playful roots, while punching above its weight when the trails get rough. Available with a 27.5" rear wheel (MX), as well as 29" in some markets. Swapping the linkarm and lower shock mount with the "Missing Link Kit" converts between 27.5" and 29" to let you pick the wheelsize that suits you best, while maintaining geometry and kinematics to ensure consistent fit and bike setup. - Aluminum hydroformed frame with Enduro bearings, 125mm travel.Ride - Aligned with Norco design kinematic, High pivot Horst Link and non-concentric idler. - Includes links for 29" and 29"/27.5" configurations for no compromise geometry and kinematics. - Fitment for longer drop seatposts per frame size.Updates to frame protection with co-molded parts - Updated frame protection with co-molded parts. - Weight (S3): 4.2 kg / 9.3 lbs - Ride AlignedTM – Perfect fit, dialed handling and personalized setup in minutes. - No Other Way Limited Lifetime Warranty Optic’s durable frame design, hardware and component decisions have been made specifically to keep the Optic on the trail for longer. Accidents can happen, and when they do, Norco’s No Other Way Limited Lifetime Guarantee is our promise to get you back on the trail as soon as possible. Check out our new warranty on Norco.com

Whether you’re carving down a steep loam line, dropping in for an enduro stage, or heading into the backcountry for an all-day epic, this bike performs. With increased rearward axle path, idler, and the innovative VPSHP suspension layout, this new design gives the Sight next level confidence and capability, up or down the mountain. With 160/150mm of travel, the 2024 Sight takes the best of the Range Platform and has tighten it up into a light, pedal friendly, maneuverable, high-pivot package. Available with a 27.5” rear wheel (MX), as well as 29” in some markets. Swapping the linkarm and lower shock mount with the “Missing Link Kit” converts between 27.5” and 29” to let you pick the wheelsize that suits you best while maintaining geometry and kinematics to ensure consistent fit and bike setup. - Rockshox Vivid Ultimate Air - Co-molded frame protection. - Missing Link Kits for wheel size conversion. - Weight (S3): 4.2 kg / 9.3 lbs - Ride AlignedTM – Perfect fit, dialed handling and personalized setup in minutes. - New No Other Way Limited Lifetime Warranty

Whether you're carving down a steep loam line, dropping in for an enduro stage, or heading into the backcountry for an all-day epic, this bike performs. With increased rearward axle path, idler, and the innovative VPSHP suspension layout, this new design gives the Sight next level confidence and capability, up or down the mountain. With 160/150mm of travel, the 2024 Sight takes the best of the Range Platform and has tighten it up into a light, pedal friendly, maneuverable, high-pivot package. Available with a 27.5" rear wheel (MX), as well as 29" in some markets. Swapping the linkarm and lower shock mount with the "Missing Link Kit" converts between 27.5" and 29" to let you pick the wheelsize that suits you best while maintaining geometry and kinematics to ensure consistent fit and bike setup. - Rockshox Vivid ULTIMATE - Co-molded frame protection. - Missing Link Kits for wheel size conversion. - Weight (S3): 3.2 kg / 6.9 lbs - Ride AlignedTM – Perfect fit, dialed handling and personalized setup in minutes. - New No Other Way Limited Lifetime Warranty

Whether you're carving down a steep loam line, dropping in for an enduro stage, or heading into the backcountry for an all-day epic, this bike performs. With increased rearward axle path, idler, and the innovative VPSHP suspension layout, this new design gives the Sight next level confidence and capability, up or down the mountain. With 160/150mm of travel, the 2024 Sight takes the best of the Range Platform and has tighten it up into a light, pedal friendly, maneuverable, high-pivot package. Available with a 27.5" rear wheel (MX), as well as 29" in some markets. Swapping the linkarm and lower shock mount with the "Missing Link Kit" converts between 27.5" and 29" to let you pick the wheelsize that suits you best while maintaining geometry and kinematics to ensure consistent fit and bike setup. - 29" with the option to change to 29"/27.5" with no compromise geometry and kinematics. - Fox Float suspension. - Co-molded frame protection. - Weight (S3): 17.6 kg / 38.8 lbs - Ride AlignedTM – Perfect fit, dialed handling and personalized setup in minutes. - New No Other Way Limited Lifetime Warranty

Whether you're carving down a steep loam line, dropping in for an enduro stage, or heading into the backcountry for an all-day epic, this bike performs. With increased rearward axle path, idler, and the innovative VPSHP suspension layout, this new design gives the Sight next level confidence and capability, up or down the mountain. With 160/150mm of travel, the 2024 Sight takes the best of the Range Platform and has tighten it up into a light, pedal friendly, maneuverable, high-pivot package. Available with a 27.5" rear wheel (MX), as well as 29" in some markets. Swapping the linkarm and lower shock mount with the "Missing Link Kit" converts between 27.5" and 29" to let you pick the wheelsize that suits you best while maintaining geometry and kinematics to ensure consistent fit and bike setup. - 29" with the option to change to 29"/27.5" with no compromise geometry and kinematics. - RockShox select suspension. - Co-molded frame protection. - Weight (S3): 15.7 kg / 34.6 lbs - Ride AlignedTM – Perfect fit, dialed handling and personalized setup in minutes. - No Other Way Limited Lifetime Warranty

Whether you're ripping fast flowy singletrack, putting the power down on punchy climbs, or tearing the tires off in the corners, the Optic continues to push the boundaries of what's possible on a short travel trail bike. The new Optic with 140mm/125mm of travel condenses years of technology from our long travel bikes into a lightweight package that's as ready to tear up climbs as it is tackling challenging descents. The VPSHP suspension layout provides increased rearward axle path and an idler to manage pedal feedback, keeping Optic's playful roots, while punching above its weight when the trails get rough. Available with a 27.5" rear wheel (MX), as well as 29" in some markets. Swapping the linkarm and lower shock mount with the "Missing Link Kit" converts between 27.5" and 29" to let you pick the wheelsize that suits you best, while maintaining geometry and kinematics to ensure consistent fit and bike setup.

ALL THE TRAVEL AND MX WHEELS Load up the van, hit the road, climb a mountain, hammer it back down, huck the gap, throw the bike back in the van, drive to the bike park and do laps on laps. Hell, you could even rock up to the startline of the world's wildest races. The Nomad’s forte is being ready and willing to go wherever, whenever. The only thing it needs is a rider willing to press send. Design Details: 170mm travel All the travel anyone needs in a single-crown bike intended for the steepest and deepest of trails. Glovebox Place your ride essentials securely beneath a new high-quality latch and panel in the Nomad's downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse to keep your tools close to hand. Proportional geometry Chainstay length and seat angle are matched to the frame size (STA steepens and rear center grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. MX wheels The mixed wheel configuration of a 29-inch wheel up front provides traction and stability, while the 27.5-inch rear wheel allows for quick back wheel steering and lifting. Mixing the best of both worlds. Flip your chip In the Low position, the shock rate becomes more progressive, particularly at the end of the stroke, and there’s some bottom-out resistance to be gained. In the High setting, the bike rides a little higher in its travel and supplies the rider with more mid-stroke support. Frame stiffness tuned by size Bigger riders means bigger stresses on bigger frames. So we tailor stiffness for every size to make sure everyone gets the same ride quality. Details matter The details are completed by a neat mud flap to protect the rear shock plus tidy cable routing within the frame and swingarm, and rubberized DT protectors to shrug off strikes. SRAM Eagle Transmission - stronger, better shifting, wirelessly The next generation SRAM Eagle Transmission specced on our CC-carbon models is a radically robust, fully integrated and interdependent wireless transmission. Built around the universal constant of the wheel axle itself, the Full Mount hangerless attachment creates a far stronger connection to the frame and the super strong derailleur provides unprecedented strength. Shifting under load is made possible due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. The new AXS Pods are extremely ergonomic and highly customizable, so shifting gears is light and intuitive. It's simply the most advanced transmission and nearly as tough as the mountain itself. VPP™ Suspension VPP™ suspension can be optimized to strike a balance between pedaling efficiency and all-out bump-chomping prowess. The Nomad is exceptional at absorbing the biggest hits so its rider can charge harder, with more confidence, in the very worst terrain. But because it's still pedal efficient, getting up to the best, highest trails isn't a chore like some other bikes. All the travel If you're stomping gaps and stamping passports you're no stranger to travel. 170mm of 38mm diameter fork and 170mm of VPP™ rear suspension, compatible with both coil and air shocks. Sensitivity and constant traction On the Nomad, lowering the anti-squat reduced pedal kickback on big square-edge hits at speed, all while improving the overall sensitivity of the suspension to maintain traction at all speeds. Up and downhill. Flat-out bump control and tracking By reducing the starting leverage of the latest Nomad, we were able to improve body-weight-influenced geometry stability throughout the travel. While reducing progression allowed the suspension to have consistently better tracking qualities throughout the stroke. Built to last Short, stout counter-rotating links connect the front and rear triangles to create an extremely robust chassis that reduces lateral flex. Simple expanding collet axles hold things together, pivots run on large diameter axles and bearings (which we offer free lifetime replacement for) and the lower link includes a grease-port for quick, easy maintenance.

ALL THE TRAVEL AND MX WHEELS Load up the van, hit the road, climb a mountain, hammer it back down, huck the gap, throw the bike back in the van, drive to the bike park and do laps on laps. Hell, you could even rock up to the startline of the world's wildest races. The Nomad’s forte is being ready and willing to go wherever, whenever. The only thing it needs is a rider willing to press send. Design Details: 170mm travel All the travel anyone needs in a single-crown bike intended for the steepest and deepest of trails. Glovebox Place your ride essentials securely beneath a new high-quality latch and panel in the Nomad's downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse to keep your tools close to hand. Proportional geometry Chainstay length and seat angle are matched to the frame size (STA steepens and rear center grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. MX wheels The mixed wheel configuration of a 29-inch wheel up front provides traction and stability, while the 27.5-inch rear wheel allows for quick back wheel steering and lifting. Mixing the best of both worlds. Flip your chip In the Low position, the shock rate becomes more progressive, particularly at the end of the stroke, and there’s some bottom-out resistance to be gained. In the High setting, the bike rides a little higher in its travel and supplies the rider with more mid-stroke support. Frame stiffness tuned by size Bigger riders means bigger stresses on bigger frames. So we tailor stiffness for every size to make sure everyone gets the same ride quality. Details matter The details are completed by a neat mud flap to protect the rear shock plus tidy cable routing within the frame and swingarm, and rubberized DT protectors to shrug off strikes. SRAM Eagle Transmission - stronger, better shifting, wirelessly The next generation SRAM Eagle Transmission specced on our CC-carbon models is a radically robust, fully integrated and interdependent wireless transmission. Built around the universal constant of the wheel axle itself, the Full Mount hangerless attachment creates a far stronger connection to the frame and the super strong derailleur provides unprecedented strength. Shifting under load is made possible due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. The new AXS Pods are extremely ergonomic and highly customizable, so shifting gears is light and intuitive. It's simply the most advanced transmission and nearly as tough as the mountain itself. VPP™ Suspension VPP™ suspension can be optimized to strike a balance between pedaling efficiency and all-out bump-chomping prowess. The Nomad is exceptional at absorbing the biggest hits so its rider can charge harder, with more confidence, in the very worst terrain. But because it's still pedal efficient, getting up to the best, highest trails isn't a chore like some other bikes. All the travel If you're stomping gaps and stamping passports you're no stranger to travel. 170mm of 38mm diameter fork and 170mm of VPP™ rear suspension, compatible with both coil and air shocks. Sensitivity and constant traction On the Nomad, lowering the anti-squat reduced pedal kickback on big square-edge hits at speed, all while improving the overall sensitivity of the suspension to maintain traction at all speeds. Up and downhill. Flat-out bump control and tracking By reducing the starting leverage of the latest Nomad, we were able to improve body-weight-influenced geometry stability throughout the travel. While reducing progression allowed the suspension to have consistently better tracking qualities throughout the stroke. Built to last Short, stout counter-rotating links connect the front and rear triangles to create an extremely robust chassis that reduces lateral flex. Simple expanding collet axles hold things together, pivots run on large diameter axles and bearings (which we offer free lifetime replacement for) and the lower link includes a grease-port for quick, easy maintenance.

Go Wilder Saving weight means little without retaining an appropriate level of stiffness and responsiveness too. So we've taken all the acceleration and out-of-the-saddle sprint qualities of a carbon XC race rocket and fused them with a rear-end that still rails corners like a hardcore TR bike. This unique XC-TR attitude is also reflected in the geometry. The head tube angle (67.1 degree) and reach (425mm) is a little steeper and shorter than a Joplin to meet the demands of aggressive climbing, yet the Wilder's seat tube angle is a touch slacker and the chainstays a little longer than a Joplin too in order to retain that familiar Juliana confidence on descents. And talking of chainstays, each chainstay length is specific to the individual frame size; meaning riders of every height enjoy the same handling and performance no matter what. Beyond the details, there are some bigger features that amplify this XC wild child's abilities. Rapid rolling 29-inch wheels are paired with a 120mm fork to tame the feral lines and smooth the sketchiest of passing maneuvers. There's even room for two water bottles within the front triangle for bigger training and racing days. SRAM Eagle Transmission - stronger, better shifting, wirelessly The next generation SRAM Eagle Transmission spec'd on our CC-carbon models is a radically robust, fully integrated and interdependent wireless transmission. Built around the universal constant of the wheel axle itself, the hangerless attachment mounts directly to the frame for a stronger connection and the derailleur provides unprecedented reliability in case of impact. Shifting under load is made possible due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. The new AXS Pods are ergonomic and customizable, so shifting gears is light and intuitive. It's simply the most advanced transmission and nearly as tough as you are.

Reach New Heights When the TR beckons you to traverse above tree line and into unmarked territory, the Joplin is ready to take you there. With its 120mm of VPP travel and 29-inch wheels, it's the ultimate climbing partner to help you reach any summit. And when it's time to point downhill, its head tube angle and slack geo will navigate the most rocky terrain. Whether you're out on a solo adventure or a soul-lifting ride with friends, the Joplin will let you soar to new heights. SRAM Eagle Transmission - stronger, better shifting, wirelessly The next generation SRAM Eagle Transmission spec'd on our CC-carbon models is a radically robust, fully integrated, and interdependent wireless transmission. Built around the universal constant of the wheel axle itself, the hangerless attachment mounts directly to the frame for a stronger connection and the derailleur provides unprecedented reliability in case of impact. Shifting under load is made possible due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. The new AXS Pods are ergonomic and customizable, so shifting gears is light and intuitive. It's simply the most advanced transmission and nearly as tough as you are. Fit for smaller riders: Proportional Geometry and frame stiffness tune Chainstay length and seat tube angle are matched to the frame size (STA steepens and rear center grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. We tailor stiffness for every size to make sure every rider gets the same ride quality. We take out carbon material as the sizes get smaller where less stiffness is needed. Smaller riders require less reinforcement on frames, and that's remedied with our size-specific frame stiffness tunes.

Wide open, dawn to dusk. The Highball is our race-bred XC hardtail. When the trail (or the competition) calls for the direct drive efficiency that only a hardtail can offer, the Highball is the choice. It looks straightforward but that belies the high-tech features and design hidden within. This is a modern take on the simple machine that many still choose to put battery acid in their thighs and fire in their lungs in order to conquer something. Whether you’re chasing medals, personal demons, or just some riding buddies, this is a hardtail you’ll be happy to log long hours upon. Hard on the throttle, soft on the body Hardtails are about as subtle as bikes come, and in the case of the Highball, simplistic refinement belies engineering effort. We’ve learned from our road biking pals that a great deal of a hardtail’s compliance comes from the Seatpost: the smaller the diameter, the softer the feel, and with more seat posts exposed to daylight, more compliance is had— which is the reason the Highball features low slung top tube and the smaller, 27.2mm diameter post. But you need not be sitting to recognize the ‘soft’ feel of the Highball— the dropped seat stays are made of custom laminate, finely tuned here in Santa Cruz for vertical compliance— and they’re oriented to isolate the top tube from high-speed trail chatter, reducing feedback to the, uh, engine.

A Fair Advantage We tapped into everything we’ve learned from years of making the highest quality carbon full-suspension bikes and added the super-efficient Superlight™ suspension to make a World Cup-winning XC race bike. The Blur isn’t guaranteed to make you a race winner but being the lightest, full-suspension carbon XC bike we’ve ever made, it might be the difference between claiming first place...or just crossing the line. Design Details: - SRAM Eagle Transmission - stronger, better shifting, wirelessly The next generation SRAM Eagle Transmission specced on our CC-carbon models is a radically robust, fully integrated, and interdependent wireless transmission. Built around the universal constant of the wheel axle itself, the Full Mount hangerless attachment creates a far stronger connection to the frame and the super strong derailleur provides unprecedented strength. Shifting under load is made possible due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. The new AXS Pods are extremely ergonomic and highly customizable, so shifting gears is light and intuitive. It's simply the most advanced transmission and nearly as tough as the mountain itself. - XC or TR The TR builds feature more travel (115mm rear, 120mm front) slightly beefier tires (Maxxis Rekon), a full height adjust dropper post, no lockout remote, and larger brake rotors. It's not a trail bike, it's an XC bike for certain courses. - Light Carbon Frame The full-suspension Blur is lighter than most pre-race dinners you'll eat - 289g saving over the previous generation. - Reserve 28 XC wheels This is the lightest Reserve MTB rim (385g or 1367g complete). The rim bed is shallower and wider, meant for the newer generation of higher volume XC tires which are popular with elite racers. - Geo to match The Blur's chainstay length is matched to frame size so every rider, no matter their height, gets the same balanced geometry and bike fit. - Two water bottles Two water bottle mounts within the front triangle mean there's enough juice (or whatever electrolytes you choose) to keep the engine running. - No proprietary gubbins There are no fiddly proprietary parts that could leave you stranded in a Cape Epic or Breck Epic campsite. - Made to last many lifetimes The legendary Santa Cruz fit, finish, and quality construction put this into a league of its own. The frame, bearings, and optional Reserve wheels come with a lifetime warranty and any service is easy to do with our Rider Support pledge. - Chainguide The only thing you'll be dropping is your competitors. - Superlight™ Suspension Our priority with the Blur was to ensure that every kilojoule of a rider's energy is translated into forward thrust. That meant making something lightweight but also really efficient. This is the (super)lightest suspension we've ever made. Frame Sizing If you're on the cusp between the recommended height range of two sizes, the absolute best thing is to try to ride them both. At a minimum, check the stack/reach measurements on your current bike and compare it to the new model you are looking at to get an idea of a fit you are already comfortable with. If riding the bike is not an option, consider the following. Personal Preference A larger size frame will be more stable and will give you more room to move without upsetting the weight balance of the bike. The larger size will put the front wheel further in front of you, which gives the feeling of security and conversely, it will require more significant body movements when you WANT to shift the weight bias of the bike. Think hard about your riding style and how active/intuitive you want it to be vs. stable and speedy. You'll need to work a bit harder to muscle the larger bike around. Body Dimension Not all bodies at a given height are the same. If you have longer legs and a shorter torso than the average person your height, that may push you towards the smaller of the recommended sizes. If you're all torso and arms, most likely you'll want to size up.

A Fair Advantage We tapped into everything we’ve learned from years of making the highest quality carbon full-suspension bikes and added the super-efficient Superlight™ suspension to make a World Cup-winning XC race bike. The Blur isn’t guaranteed to make you a race winner but being the lightest, full-suspension carbon XC bike we’ve ever made, it might be the difference between claiming first place...or just crossing the line. Design Details: - SRAM Eagle Transmission - stronger, better shifting, wirelessly The next generation SRAM Eagle Transmission specced on our CC-carbon models is a radically robust, fully integrated, and interdependent wireless transmission. Built around the universal constant of the wheel axle itself, the Full Mount hangerless attachment creates a far stronger connection to the frame and the super strong derailleur provides unprecedented strength. Shifting under load is made possible due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. The new AXS Pods are extremely ergonomic and highly customizable, so shifting gears is light and intuitive. It's simply the most advanced transmission and nearly as tough as the mountain itself. - XC or TR The TR builds feature more travel (115mm rear, 120mm front) slightly beefier tires (Maxxis Rekon), a full height adjust dropper post, no lockout remote, and larger brake rotors. It's not a trail bike, it's an XC bike for certain courses. - Light Carbon Frame The full-suspension Blur is lighter than most pre-race dinners you'll eat - 289g saving over the previous generation. - Reserve 28 XC wheels This is the lightest Reserve MTB rim (385g or 1367g complete). The rim bed is shallower and wider, meant for the newer generation of higher volume XC tires which are popular with elite racers. - Geo to match The Blur's chainstay length is matched to frame size so every rider, no matter their height, gets the same balanced geometry and bike fit. - Two water bottles Two water bottle mounts within the front triangle mean there's enough juice (or whatever electrolytes you choose) to keep the engine running. - No proprietary gubbins There are no fiddly proprietary parts that could leave you stranded in a Cape Epic or Breck Epic campsite. - Made to last many lifetimes The legendary Santa Cruz fit, finish, and quality construction put this into a league of its own. The frame, bearings, and optional Reserve wheels come with a lifetime warranty and any service is easy to do with our Rider Support pledge. - Chainguide The only thing you'll be dropping is your competitors. - Superlight™ Suspension Our priority with the Blur was to ensure that every kilojoule of a rider's energy is translated into forward thrust. That meant making something lightweight but also really efficient. This is the (super)lightest suspension we've ever made. Frame Sizing If you're on the cusp between the recommended height range of two sizes, the absolute best thing is to try to ride them both. At a minimum, check the stack/reach measurements on your current bike and compare it to the new model you are looking at to get an idea of a fit you are already comfortable with. If riding the bike is not an option, consider the following. Personal Preference A larger size frame will be more stable and will give you more room to move without upsetting the weight balance of the bike. The larger size will put the front wheel further in front of you, which gives the feeling of security and conversely, it will require more significant body movements when you WANT to shift the weight bias of the bike. Think hard about your riding style and how active/intuitive you want it to be vs. stable and speedy. You'll need to work a bit harder to muscle the larger bike around. Body Dimension Not all bodies at a given height are the same. If you have longer legs and a shorter torso than the average person your height, that may push you towards the smaller of the recommended sizes. If you're all torso and arms, most likely you'll want to size up.

Evolved over decades of freeride innovation, the Shore Park is your ultimate co-pilot on your gravity-fueled days at the bike park. With either a 200mm dual crown or a 180mm single crown fork, the Shore Park easily shrugs off deep landings and eats up rough trails, while retaining the dynamic and responsive feel required to boost jumps and rail berms. - Long Travel, No Kickback The Shore is designed around Norco's VPSHP suspension layout that increases the rearward axle path to improve suspension performance in technical terrain. Built for the bike park with the dynamic, and responsive feel park riding demands, and the grip and support to boost jumps and shrug off deep landings on rough trails. - Get up to Speed Fast The suspension design and rider compartment get the Shore moving quickly on run-ins and rollers. - Durable Design and Easy Maintenance Frame design, hardware, and component decisions have been made specifically to keep the Shore on the trail for longer - and when maintenance is necessary, it's easy and quick. - Two Configurations Available Options include a 200mm dual crown fork or a 180mm single crown fork. Both models are suited to bike park and shuttle laps and feature a DH 7-speed drivetrain. - Ride Aligned™ Setup Guide The updated Ride Aligned™ Setup Guide provides comprehensive bike setup recommendations for your Shore tailored to height, weight, and frame size with features to further dial in your setup for your riding style and trails.