Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools/Maintenance

$25.00 - $40.00
- Anti-Loosening, Anti-Corrosion thread prep with PTFE - Two colors offer coating for different spoke lengths
$95.00
This 23-piece Wheels Mfg. drift set is used to install 10mm and larger inside diameter sealed bearings, using a press with 3/8" diameter rod - Includes open bore and over axle drifts for 6802, 6901, 6902, 6903, 6000, and 6001 bearings - 10mm ID hole, for use with Wheels Manufacturing PRESS-1 or PRESS-4 bearing press handles
$84.00
This do-it-all universal bottom bracket press is designed to press in all current Wheels Mfg. bottom brackets. Economical and easy to use, this tool is made up of two machined aluminum handles, a 1/2-inch threaded rod, and two machined aluminum drifts. Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters. No more searching for the correct size drifts and parts—just match up the drift to your frame's BB shell size and your bottom bracket's bearing size, and press away. - Zinc-plated 1/2-inch diameter threaded rod resists bending, allowing for the cups to align and press in straight - Drifts can also can be used as a frame bottom bracket shell sizing guide - Machined aluminum handles and drifts - Red anodized drifts and handles - Steps on drift are marked with diameter sizes - Works with BB shells up to 132mm wide - Includes two universal BB drifts
$16.61
Wera ZyklopT-handle for higher torque transfer. For 3/8" square sockets with ball lock. Adjustable drive for more flexible usage. - 3/8" Zyklop T-handle with adjustable drive - For 3/8" square sockets with ball lock - High-quality chrome vanadium steel, matte chrome-plated - For higher torque transfer
High-quality L-key set with extra-short arm for use on difficult-to-access screws. For hexagon socket screws. Hex-Plus offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The precise chrome-plated design ensures high corrosion protection. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. Comes in a practical clip fastener, whose wear-free material provides secure storage for the L-keys and enables simple removal. - Extra-short arm for use on difficult-to-access screws - Hex-Plus allows socket head screws to live longer - The ballpoint on the long arm allows dependable working even in difficult situations - Chrome-plated for high corrosion protection - In a practical clip out of wear-free material
$52.50
High-quality L-key set with color-coded, convenient plastic sleeve. This ensures that the tool is quickly to hand and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The wear-resistant clip material ensures secure storage of the L-keys as well as simple removal. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. - Hex-Plus allows socket head screws to live longer - Hexagonal ballpoint on the long arm - With Take-it-easy tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures
$58.34
High-quality L-keys for recessed TORX screws. Comes with a holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screws on the tool at both ends. The BlackLaser surface treatment provides outstanding corrosion protection and a long service life. Available in a practical clip fastener, whose wear-free material provides secure storage for the L-keys and enables simple removal. - Holding function for recessed TORX screws - BlackLaser surface treatment for corrosion resistance - "Take-it-easy" tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Includes: 1x TX 8x76 mm, 1x TX 9x79 mm, 1x TX 10x85 mm, 1x TX 15x90 mm, 1x TX 20x96 mm, 1x TX 25x104 mm, 1x TX 27x112 mm, 1x TX 30x122 mm, 1x TX 40x132 mm
- Pedal thread inserts are used to replace damaged threads in cranks
$8.99 - $14.99
- Blade chrome plated, black anodised tip - Handle – polypropylene
$13.39 - $33.34
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$99.99
An advanced service kit for the home mechanic as well as the bike shop mechanic. Includes all the parts and tools needed to service TRP and Tektro brakes. Just add mineral oil. Contains the following items: - Hose cutter - Two premium syringes with thread-on hoses - Bleed port adapters - Bleed blocks for 2, and 4 piston calipers - Assortment of compression nuts, olives, and barbs for both 5.5mm and 5.0mm hose Hose Diameters: - DH-R EVO, Quadiem, Slate T4: 5.0 mm - All other TRP and Tektro Brakes: 5.5 mm
$16.99
Service your TRP brakes like a pro with our new Bleed Funnel. COMPATIBILITY CHART BRAKE MODEL COMPATIBILITY QUADIEM SERIES YES TRAIL SERIES YES SLATE SERIES NO* HYLEX SERIES YES HY/RD SERIES YES HYDRO TT YES DASH SERIES NO After feedback from our pro Athletes (and their mechanics) we have developed the TRP bleed funnel to simplify the bleed process. Take your service to the next level. *Slate uses a smaller bleed fitting. Funnel can be used with a slate Bleed fitting adapter
$8.50
Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.
$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
$29.99
- Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic
$5.00
Shimano Wiring Plug Tool for use with Di2 - Tool is required to assist Di2 shifter plug installation - Shimano TL-EW02 tool for connecting and disconnecting the Di2 wiring harness and shifter plugs - For use with Dura-Ace 9070, Ultegra 6870/6770 and Alfine Di2 components and E-Tube wiring
$25.00
SRAM Bleeding Edge Tool. - Use with Avid or SRAM Pro Bleed Kit
$38.00
The SRAM chain wear indicator tool is compatible with all the existing SRAM chain models and this includes HARD CHROME and non-HARD CHROME chain technology with a 0.8% wear critical specification.
$11.00
DOT Disc Brake Assembly Grease is specially formulated for DOT-fluid brake systems. - Recommended for lever pistons, hose compression nuts, threaded barbs, and olives
$11.00 - $24.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
$9.00
• Essential mechanic tool to properly service and maintain all RockShox products • For RockShox Monarch
$46.00
Periodic hydraulic remote bleeds are necessary to maintain consistent performance. RockShox's Bleed Kit has everything you need to keep your Reverb and X-Loc remotes functioning at their best.
$21.00
- Required to bleed Reverb 1x remotes - Compatible with Standard RockShox bleed kits - Included with remote upgrade kit and Reverb 1x post - Not compatible with SRAM brakes bleeding edge fitting
$65.00
- 200 Hour/1 Year Service Kit for Deluxe/Deluxe Remote A1-B2 (2017-2020)/Deluxe Nude B1+ (2019+) - Includes Air Can Seals, Piston seal, Glide Rings, IFP Seals, Remote Spares
$53.00
Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.
$14.00
Eyelet Bushing Tool
$100.72
RockShox, 11.4115.092.010, Complete service kit, 2011 Vivid Air
$40.00
RockShox, 11.4115.129.010, Service Kit, Monarch Plus (does not include air can seals)
$55.00
- RockShox, 11.4118.038.000, Service kit, Monarch B1RL C1 R, RT, RT32014+
$55.00
- RockShox, 11.4118.038.002, Service kit, Monarch Plus B1 2014+
$20.00
REAR SHOCK SERVICE KIT BASIC- MONARCH WITH AUTOSAG SPECIALIZED B1
$31.00
Rear Shock Service Kit Full- Monarch With Autosag Specialized B1
$20.00
200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon RL/TK A1 (2018+)
$81.00
This kit contains all the parts needed for scheduled maintenance and/or rebuild of A2 Stealth Reverb Seatposts. - Includes new, upgraded IFP - Requires RockShox Specialty Tools to perform Service: Oil Height Tool, IFP Height Tool
$6.00
RockShox, 00.6815.066.020, Reverb post bleed tool
$81.00
This kit contains all the parts needed for scheduled maintenance and/or rebuild of A2 non-Stealth Reverb Seatposts. - Includes new, upgraded IFP - Requires RockShox Specialty Tools to perform Service: Oil Height Tool, IFP Height Tool
$5.00 - $24.00
Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.
$36.00
Remote rebuild kits and subcomponents for Reverb and Reverb Stealth Posts.
$85.00
Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.
$45.00
50 Hour Service Kit (Includes Air Can Seals, Piston Seal, Glide Rings) - Sidluxe A1 (2020)
$53.00
- 200 hour / 1 year service kit for Super Deluxe RT3 A1 rear shocks - Includes air can seals, piston seal, glide rings, IFP seals, reservoir seals
$4.00 - $38.00
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
$49.00
- Trek Reaktiv Thru Shaft 200 hour service kit
$45.00 - $77.00
- Essential mechanic tools to properly service and maintain all RockShox products - Clamps the shock body for easy maintenance
$94.00
RockShox, 11.4118.032.001, Service kit, Vivid Air B1 (Requires Counter Measure tool)
$17.00
Vivid Air Rear Shock Basic Service Kit - Includes replacement seal, bushing, o-ring, and bottom-out/negative-bumper
$47.48
RockShox, 11.4118.032.000, Service kit, Vivid B1 (Requires Counter Measure tool)
$7.50 - $27.00
Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously
$9.00
This chain lube moved the 21st century closer to the 22nd century. Drive-trains look like they just came out of the box. The well known smoothness and quietness that Rock "N" Roll Lubes are known all over the world for, just went to a new level.
$6.99
- 8mm to 16mm hex wrench adapter for removal of spindle from Cinch non-drive crank arm
$6.50
The Problem Solvers Suspension Pump Adapter is for use with model-year 1999 to 2000 RockShox SID suspension forks. This aluminum adapter threads into the fork to add air and fine-tune the pressure.
$33.99 - $39.95
The Problem Solvers Through-Axle adapters make it possible to easily fit front and rear wheels with through axles into truing stands for wheel truing and repair. These adapters fit into the common through-axle sizes and have o-rings so that they fit nicely and stay put as you work on the wheel and take it in and out of the stand. They're made of CNC-machined 6061 aluminum for quality and durability. - Front compatible with 9/15/20mm hubs - Rear: compatible with 10/12mm hubs
$36.00
- Made from heat-treated tool steel to ensure the ultimate in strength and lasting performance. - Ergonomic, cushioned grip, and high leverage design for comfort and ease of use. - Quickly and cleanly cuts brake and derailleur cables, housing, and other wires. Cable cutters are an essential tool used for some of the most fundamental elements on the bicycle. What seems like a simple tool can often be the root of frustration when poor cut quality ruins a brand new cable, crimps housing shut, or leaves strands uncut. The Pedro's Cable Cutter is an industry favorite and when put to the test against the competition and you will quickly see why. Our cable cutter is designed for years of service, for comfortable and easy usage, and with extra jaw overlap ensuring a clean cut every time. The Cable Cutter is designed for cutting steel cables (wire rope) up to 4mm in diameter. Backed by Pedro's lifetime warranty.
$16.00
- New extra-long 27cm hex key and second ball-end deliver leverage and speed - Specifically designed for quick and easy installation and removal of pedals and cranks - Ergonomic dual-density screw driver handle - Designed to stand up to the harsh conditions of professional use Pedals featuring a back-side hexagon broach are now standard on many modern bicycles in 6mm and 8mm sizes. Pedro's led the way with our 6mm hex pedal driver specifically designed for quick-and-easy pedal installation and removal. Features include an ergonomic dual-density screw driver handle for comfort and control, a new extra-long 27cm hex key for exceptional leverage, a second ball end for quick and easy installation or removal, and heat-treated S2 tool steel construction for the ultimate in strength and lasting performance. Backed by Pedro's lifetime warranty.
$29.99
These premium needle nose pliers feature a compact 6" (150mm) length, forged and heat-treated steel construction, and ergonomic dual-density grips. The self-opening jaws provide a full-featured profile, ready for gripping, crimping, and cutting tasks. - Compact 6" (150mm) length and self-opening jaw - Forged and heat-treated steel constuction - Ergonomic dual-density grips
$7.49 - $17.99
- Redesigned TPR handle features improved ergonomics with slimmer profiles, improved tip clearance, full long-leg coverage, easy-to-read size marking, and color band for quick wrench identification. - Made from heat-treated S2 tool steel to ensure high strength and lasting performance. Pedro's Pro T/L wrenches have become a favorite of mechanics around the world. The updated wrenches feature a new handle shape with slimmer profiles and full long-leg coverage for enhanced comfort and control, improved tip clearances, easy-to-read size markings, and color bands for quick identification. Each wrench is crafted from premium S2 tool steel to ensure the strength and lasting performance. Extra length on each leg of the wrench offers better leverage and easy access to hard-to-reach bolts.
$9.49 - $12.99
- Redesigned TPR handle features improved ergonomics with slimmer profiles, improved tip clearance, full long-leg coverage, easy-to-read size marking, and color band for quick wrench identification. - Made from heat-treated S2 tool steel to ensure high strength and lasting performance. Pedro's Pro T/L wrenches have become a favorite of mechanics around the world. The updated wrenches feature a new handle shape with slimmer profiles and full long-leg coverage for enhanced comfort and control, improved tip clearances, easy-to-read size markings, and color bands for quick identification. Each wrench is crafted from premium S2 tool steel to ensure the strength and lasting performance. Extra length on each leg of the wrench offers better leverage and easy access to hard-to-reach bolts.
$73.99
- Structurally supports rear dropouts for maximum frame protection during travel. - Allows full forward or backward rotation of drivetrain and shifting through full range of gears. - Adjustable design fits 130 and 135 QR dropouts and all 12mm thru axle frames up to 12x157. - Professional grade aluminum and solvent resistant plastic components ready for daily life in the wash bucket or traveling the world. The Travel Keeper is equally at home protecting a frame's rear triangle during travel or providing full chain keeper functionality. Adjustable design fits all rear QR and 12mm thru axle frames and features aluminum construction, shifting across all gears, and heavy-duty solvent resistant plastic pulley.
$35.00 $69.99 50% Off
- Updated jaws work on track cogs, cog & bb lockrings, e-bike chainrings, and cassettes. - Updated adjustment knob features gear size indication for quick reference of the current tool setting. - Adjustable plier design securely locks in place ensuring positive engagement and preventing slippage. - Fits 9-23 tooth gear sizes and 40-46mm OD lockrings with opposing notches. Compatible with all multi-gear cassettes and all standard width cogs and e-bike chainrings. Visit pedros.com/chainfit for the latest compatibility information. The Vise Whip is simply a better solution for holding your cassette during removal and now also works on track cogs, cog & bb lockrings, and e-bike chainrings. This innovative tool was developed by Pedro's in close collaboration with legendary frame builder and cycling technical author Lennard Zinn. The Vise Whip is beautifully simple to use. Once you try it, you'll never go back to a chain whip again.
Page 1 of 4 Next page