Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

$94.99 - $109.99
The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready
$94.99 - $109.99
The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready
$100.00
Thicker walls plus extremely low weight make Stan's ZTR Crest rim a stiff, light XC race rim. The Crest uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction.
$95.00
Replacement Freehub Body for Trace hubs.
$89.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true.
$88.79
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately
$0.62 - $88.19
Champion 2.0 Black Spokes - One 264mm spoke = 7g
$80.00 - $85.00
Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed. - 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration - Chromed steel bearings - Wide bearing stance and axle design reduces flex and adds durability - Low drag main seal prevents contamination and reduces resistance - Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components
$14.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
$79.00
- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Drive Side Axle End Cap
$56.99 - $75.99
Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)
$64.90 - $74.99
Upgrade hoops for your kid's 24” MTB. The SPOON 28-24 is a durable six series alloy rim model featuring SPANK’s patented OohBah profile design. A 23mm internal width accepts a wide range of 24” tires from street to DH. Whether you’re looking to spruce up your street bike, or out to upgrade your kid’s MTB, SPOON 28-24 rims are an ultra-strong, ultra-safe option at a value oriented price. Key Technologies: OohBah Tubeless: Not recommended ERD (mm++): 474 ETRTO (mm): 507x23 Discipline: Kids
$74.00
Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.
$57.99 - $62.49
Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - ISO Diameter: 507 / 24-inch BMX - Valve: Schrader - Tire Type: Clincher
$57.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance
$54.95
- E*thirteen freehub bodies feature 6 degree (60 Point) engagement - Kits include freehub body, bearings, springs, and pawls - SRAM XD-11 Freehub body converts all e*thirteen plus level hubs for use with SRAM XD-11 drivetrains
$0.65 - $54.19
- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 222g @ 32h/265mm - Box of 100 - Nipples sold separately
$54.00
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
$50.00
- Bearing/Spacer upgrade for greater durability on M1-121, M1-221, and M1-321 Hubs - Includes 2 bearings, 1 sleeve and 1 bearing adjuster - Note: does not fit M1-120 Or M1-220 Hubs
$49.99
Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)
$48.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
$11.50 - $48.00
We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$46.90
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Removable, plug-in lever design is streamlined and protects your RWS lever
$45.00 - $46.00
We loved the simplicity and clean look of Axle F so we made Axle R. Using a solid 7075-T6 rod rather than a hollow tube makes this the strongest possible rear axle design while still being lighter than a stock 12mm thru axle with integrated lever. If you already carry the EDC multitool with you, there's no need for the heavy integrated lever which can snag on trail-side obstacles. Add one of our coloured cap kits to match your Axle R to your bike. FEATURES - Lighter than stock 12mm thru axles with integrated lever or QR - 7075-T6 Solid rod design for maximum stiffness and strength - Low profile head won't get caught on trail-side obstacles. - 5mm and 6mm hex interfaces - All common axle length/thread combinations covered COMPATIBILITY - You need to know both your axle length and axle thread pitch to select your new OneUp axle. These are both specific to your frame. Hub spacing (e.g. 142x12) does not denote your axle size. Your axle length and pitch might be laser etched on your existing axle (e.g. 178 x 1.5). Check here first. If your axle size is not marked, check with your frame manufacturer. Axle specs are not usually listed on website specs. - Check our printable axle selector to ensure you pick the right length/thread pitch - NOT compatible with tapered "Syntace X-12" style axles
$42.00
Hope Rear Axle Conversion Kits · For Pre-2011 Hope hubs labeled Pro2(axle and end caps)
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 135mm spacing - Type: Hollow Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 146mm - 1 axle per bag