Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$40.83 - $140.00
Adjustable spring rate coil that's also progressive. Sprindex is specifically designed to have a progressive spring rate for the last 20% of stroke for big hit support and for bikes with a linear linkage design. - Adjustable spring rate - Adapters included for different size shocks and set ups - Made of super high tensile spring steel
$33.50 - $50.00
The 12mm slotted MDS dropout is the newest chip for Surly's MDS equipped trail frames. You like chips, don't you? The 12mm slotted dropout chip uses a standard derailleur mount for maximum compatibility and is made of cast and machined 6061-T6 aluminum, with a fender eyelet. What's the coolest part about the 12mm slotted MDS chip, you ask? The fact that it also has the capability to run a 12 x 142mm thru-axle in a single speed configuration. This is good news because single speeds are good news. When you get an MDS equipped frame you're getting the option to set it up however you want. You can run a 142 x 12mm thru-axle rear end with a direct mount Shimano hanger, standard 135mm QR or The Mighty Singlespeed. The way this will work is that Surly complete bikes that feature the MDS will ship with whatever chip is compatible with derailleur spec. For instance, the complete Instigator 2.0 ships with the 142 x 12mm thru-axle Shimano chip. If you want to change it to a singlespeed later (and why wouldn't you?), all you have to do is get the SS chip. Frames will ship with all three MDS chips so pick your poison. The 142 x 12mm and 135mm QR chips are made of cast and machined 6061-T6 aluminum and The Mighty Singlespeed chip is 304 stainless steel, because the two words 'aluminum' and 'singlespeed' should never be too close to each other. Bad things can happen…. As you can see, the MDS gives you not just different build options, it lets you use a more varied selection of parts for your frame up builds. The MDS is featured on most of our trail bikes. That's right: Krampus Ops, Karate Monkey Ops, Instigator 2.0 and Ice Cream Truck frames all sport these puppies.
$49.99
These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever
$49.99
I-SpecBar Clamps are a one-piece hinged clamp adapter that allows users to mount I-Spec compatible shifters or dropper levers onto the handlebar, without requiring an I-Spec brake lever. - Sold individually, the clamp can be mounted to the right or left side - Hinged clamp for easy installation without removing other components - Black Anodized, CNC AL-6061 Aluminum - Compatible only with Shimano I-Spec II compatible shifters or dropper post remotes - 23g
$49.50
If you're not looking for chain retention or your bike has an integrated chain guide, you can still add some bash protection with the OneUp ISCG05 Underbash. The Underbash includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. Designed for frames with 2 ISCG05 tabs only (Evil, Rocky Mountain, etc). If your bike has three ISCG05 tabs, check with the frame manufacturer to ensure the lower tabs are strong enough for a bash application. Failure to do so could result in frame damage. FEATURES - Install without removing your crank - Single tool install and adjustment - Boost compatible - Oval Compatible - Stainless Steel hardware - Includes 3 bash plates (28-30T, 32-34T, 36T) SPECS - Weight: 68g 32-34T - Capacity: 28-36T - Chainline: 2.5mm adjustment - Mount: ISCG05 2-Bolt ONLY - Color: Black - Material: 7075 aluminum, glass reinforced thermoplastic
$49.00
Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm
$48.00
Wheels Manufacturing's SRAM compatible Universal Derailleur Hanger simplifies thousands of hanger designs into one universal standard. Machined completely out of aluminum, this new hanger is not only strong but designed to rotate backward and slip slightly in the case of an impact preventing chain jams and protecting the drive train. All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - Compatible with bike frames designed to accept the SRAM UDH (Universal Derailleur Hanger) - Compatible with all MTB and eMTB drivetrains - Machined aluminum body anodized black - Thru-Axle thread pitch M12 x 1
$47.00
RockShox Reverb Service Kit includes foam ring, inner seal head bushing and O-rings
$46.00
- Brass cam bushing offers smooth lever action and secure clamping force - CNC machined aluminum collar and lever with 6mm bolt
$46.00
SEATPOST SERVICE KIT - 200 HOUR/1 YEAR SERVICE (INCLUDES FOAM RING, COLLAR, INNER SEALHEAD BUSHING, & O-RING) - REVERB STEALTH C1
$24.99 - $45.00 $24.99 - $45.00 Up to 33% Off
The Maxle Stealth offers a light, low-profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
$45.00
Upgrade your ride. The highly tunable DebonAir air spring is ready for whatever the trail demands. Buttery smooth feel off the top, now optimized to maintain higher ride height and add more confidence on technical terrain. - RockShox Air Spring Upgrade Kit - DebonAir C1, 170 mm, ZEB, Silver Head, A1+
$42.00 - $45.00
DebonAir air spring assembly to update Pike and Revelation forks.
$42.00 - $45.00
DebonAir air spring assembly to update Yari and Lyrik forks.
$45.00 $46.00 2% Off
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings
$24.99 - $44.99
MisMatch adapters allow users to mount Shimano & SRAM brakes and shifters on one clamp. MisMatch Adapter 1.0/1.1 attaches SRAM shifters to Shimano I-Spec-A or I-Spec-B brake lever clamps. MisMatch adapters and the ever evolving “standards” it attempts to integrate between SRAM and Shimano is a confusing subject. Shimano brake and shifter mounting options have changed a lot, going through four mounting systems from 2011-2016. Shimano components have a model number printed somewhere on the brake and/or shifter, and this is the best way to determine what you own and what adapter you need. MisMatch 1.0/1.1 fits Shimano brake levers:BL-M985, BL-M988, BL-M820, BL-M785, BL-T785, BL-M675, BL-T675, BL-M640, BL-M596, BL-M820-B, BL-M785-B, BL-M675-B, BL-M640-B, BL-M615, BL-M506 - Annodized Black
$29.95 - $44.99
Problem Solvers' MisMatch Adapters allow you to combine your Shimano and SRAM shifters and brakes onto a single clamp for a more ergonomic, less-cluttered handlebar. These CNC-machined aluminum adapters work with Shimano I-Spec and SRAM MatchMaker components to fasten your preferred combination on to a single, existing bar clamp.
$43.50
Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control. - Allows for easy installation on Rock Shox Torque Cap compatible forks
$43.50
Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control. - Allows for easy installation on Rock Shox Torque Cap compatible forks
$42.00
One of the single biggest improvements you can make to your fork. Engineered and developed over several years, the PUSH Ultra Low Friction fork seals provide class leading sealing while offering incredibly low friction, resulting in an increase in small bump sensitivity. - Advanced friction-reducing, Molybdenum filled material increases small bump sensitivity while also increasing durability - Dual scraping lip design provides maximum scraping effect while minimizing friction - Loaded oil sealing lip integrated into wiper to keep lower leg fluid from escaping fork, increasing performance and durability - High-volume, absorbent foam rings ensure consistent lubrication improving seal life and bump sensitivity - Molded utilizing precision 3D machined molds for exact tolerance
$42.00
- Lever Internals Gen 2 Guide RSC/Ultimate|Code RSC Qty 1
$42.00
- Lever Internals Gen 2 Level Ultimate/TLM/TL Qty 1
$40.00
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss 18t Superlight Star Ratchet Kit: Includes Springs and Grease
$40.00
Steel rear shock springs. - 36.5mm (1-7/16in.) inner diameter steel springs - Also compatible with Fox and Cane Creek Coil Shocks
$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application - These hangers do not come with mounting hardware - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application - These hangers do not come with mounting hardware - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
Page 1 of 5 Next page